Skip to content

Cut your own jumpers

TUOFENG 22 AWG UL1007 solid hook-up wire, 6 colours × 9 m

Six 9 m spools of 22 AWG UL1007 solid hook-up wire from TUOFENG, tinned copper in 0.010 in PVC insulation rated 300 V and 80 °C with a VW-1 flame rating, in red, black, green, yellow, blue and white.

Six spools of wire in black, blue, green, white, yellow and red on a TUOFENG box

TUOFENG 22 AWG UL1007 solid hook-up wire, 6 colours × 9 m

Six 9 m spools of 22 AWG UL1007 solid hook-up wire from TUOFENG, tinned copper in 0.010 in PVC insulation rated 300 V and 80 °C with a VW-1 flame rating, in red, black, green, yellow, blue and white.

Tie points
Absent from the listing — wire only
Power rails
Absent from the listing
Contact quality
Solid tinned copper conductor, first and fifth bullets
Backing
Absent from the listing
Wire types and lengths
Solid hook-up wire, 6 spools of 9 m (30 ft), fifth bullet
Gauge
22 AWG, 0.32 mm², title and first bullet
Pack contents
6 spools: red, black, green, yellow, blue, white, fifth bullet; PVC 0.010 in, 300 V, 80 °C, VW-1, second and fourth bullets
Amazon reference
B07V5FVSYL (same reference on 5 Amazon marketplaces)
EAN
0607994214750
  • Ratings given: 300 V, 80 °C, VW-1
  • Solid 22 AWG, a common breadboard size
  • Must be cut and stripped

Best for: A maker who cuts jumpers to exact length for neat breadboard and perfboard wiring.

≈ £16 / 18 €
Check price on Amazon

Specifications

Tie points
Absent from the listing — wire only
Power rails
Absent from the listing
Contact quality
Solid tinned copper conductor, first and fifth bullets
Backing
Absent from the listing
Wire types and lengths
Solid hook-up wire, 6 spools of 9 m (30 ft), fifth bullet
Gauge
22 AWG, 0.32 mm², title and first bullet
Pack contents
6 spools: red, black, green, yellow, blue, white, fifth bullet; PVC 0.010 in, 300 V, 80 °C, VW-1, second and fourth bullets
Amazon reference
B07V5FVSYL (same reference on 5 Amazon marketplaces)
EAN
0607994214750

The TUOFENG hook-up wire listing, bullet by bullet

Five bullets: UL1007 22 AWG solid tinned copper with PVC insulation; abrasion and chemical resistance, with insulation to 80 °C; easy stripping and termination; 0.010 in PVC, 300 V and a VW-1 flame rating; and six 9 m spools in red, black, green, yellow, blue and white.

TUOFENG is wire, not jumpers

Cut to length. Solid 22 AWG pushes straight into breadboard holes once stripped, and lies flat where pre-made jumpers loop. The trade-off is the time to cut and strip each one.

TUOFENG’s ratings

300 V, 80 °C and VW-1 are the kind of figures hook-up wire is chosen by. Among the seven listings here, it is the only one to give electrical and heat ratings.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 18 € to 20 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • An 830-point and a 400-point breadboard, a bundle of flexible jumpers, a box of colour-coded U-shaped jumpers and tweezers

    Aypzuke Breadboard kit: 830 and 400 boards, 140 U-shaped jumpers in 14 lengths, 65 flexible wires, tweezers

    A breadboard kit from Aypzuke with an 830-point and a 400-point board in ABS with nickel-plated phosphor bronze contacts, 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm, 65 flexible jumper wires and tweezers, packed in a box.

    Tie points
    1 × 830-point and 1 × 400-point breadboard, first and second bullets
    Power rails
    Absent from the listing
    Contact quality
    Nickel-plated phosphor bronze contact strips, second bullet
    Backing
    Absent from the listing — ABS plastic boards, second bullet
    Wire types and lengths
    140 U-shaped male-to-male jumpers in 14 lengths: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125 mm; 65 flexible jumper wires, first and third bullets
    Gauge
    24 AWG for the U-shaped jumpers, third bullet
    Pack contents
    2 breadboards, 140 U-shaped jumpers, 65 flexible wires, tweezers, box, first bullet
    Amazon reference
    B0BMFXPSVG (same reference on 6 Amazon marketplaces)
    EAN
    0760627267377
    • Fourteen pre-bent jumper lengths, each listed
    • Two boards, 830 and 400 points
    • Flexible wires not described beyond their count

    Best for: A maker who wants tidy, flat wiring on the board with jumpers cut to length.

    ≈ $10 / £10 / 9 €
    Check price on Amazon
  • Ten silicone leads in red, black, yellow, green and blue pairs, stackable banana plugs at one end and pins at the other

    Cleqee Stackable banana plug to breadboard male jumper leads, 10 pieces, silicone

    Ten test leads from Cleqee with soft silicone insulation, about 27.2 cm long, each with a stackable banana plug at one end and a male breadboard jumper pin at the other, in five colours, for connecting power supplies, multimeters and LED strips to a breadboard.

    Tie points
    Absent from the listing — leads only
    Power rails
    Absent from the listing
    Contact quality
    Stackable banana plugs; pure copper male breadboard pins, second and third bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Banana plug to male breadboard pin, about 27.2 cm, silicone insulation, first, third and fifth bullets
    Gauge
    Absent from the listing
    Pack contents
    10 leads in 5 colours, fifth bullet
    Amazon reference
    B08Q7PXVL9 (same reference on 5 Amazon marketplaces)
    EAN
    0784110446100
    • Stackable banana plugs
    • Soft silicone insulation
    • No gauge or current rating

    Best for: A maker powering a breadboard from a bench power supply or probing it with a multimeter.

    ≈ £9 / 10 €
    Check price on Amazon
  • Long white solderless breadboard with red and blue rail lines along both edges, beside a bundle of flexible jumper wires

    CyConncet Solderless breadboard 5.4 × 16.5 cm with two distribution strips

    A solderless breadboard from CyConncet, 5.4 × 16.5 × 0.85 cm in ABS, with nickel-plated phosphor bronze spring clips, two distribution strips, top and bottom rows connected horizontally and the rest vertically, for 0.8 mm jumper wires, and joinable with other units.

    Tie points
    Two distribution strips, 200 jacks, first bullet
    Power rails
    Top and bottom rows connected horizontally and split in the middle, fourth bullet
    Contact quality
    Nickel-plated phosphor bronze spring clips, first bullet
    Backing
    Absent from the listing — ABS plastic, joinable by units, second and fifth bullets
    Wire types and lengths
    Absent from the listing — matching jumper wire diameter 0.8 mm, first and second bullets
    Gauge
    0.8 mm wire diameter, second bullet
    Pack contents
    Absent from the listing text — board size 5.4 × 16.5 × 0.85 cm, first bullet; the product photograph shows the board with a bundle of flexible jumper wires
    Amazon reference
    B0D3BZBHVS (same reference on 6 Amazon marketplaces)
    EAN
    0784633677708
    • Nickel-plated phosphor bronze contacts
    • Board size given: 5.4 × 16.5 × 0.85 cm
    • Rails split in the middle

    Best for: A beginner prototyping small circuits who may join boards together later.

    ≈ 5 €
    Check price on Amazon

Elsewhere on the workbench

  • Ten bright steel 4-flute end mills from 2 to 12 mm beside a blue case, shanks stamped SWT with sizes and HSS-AL

    ASNOMY HSS 4-flute end mill set, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from ASNOMY with straight shanks, from 2 to 12 mm, for profile, shoulder and finish milling of ferrous and non-ferrous metals, plastics and wood.

    Shank diameter
    Absent from the listing text — the shanks in the product photograph are stamped with 6, 8, 10 and 12 mm shank sizes, as in 12×12×26×83
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, second bullet; lengths only on the stamped shanks in the photograph
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel, first bullet
    Material suitability
    Aluminium, cast iron, copper, magnesium alloys, plastics and wood, third bullet
    Amazon reference
    B089VWBZY2 (same reference on 6 Amazon marketplaces)
    EAN
    0747045238394
    • Sizes up to 12 mm
    • Milling operations named: profile, shoulder and finishing
    • No shank sizes or lengths

    Best for: A benchtop milling machine owner who needs larger cutters than a desktop router collet takes.

    ≈ $16 / £15 / 19 €
    Check price on Amazon
  • Ten blue-coated engraving bits on silver shanks, five round-ground V-points and five flat triangular tips

    Genmitsu V-bit and flat engraving bit set, 10 pieces, 1/8 in shank, 20–90°

    Ten engraving bits from Genmitsu on 1/8 in shanks — five flat and five triangular V-bits at 20, 30, 45, 60 and 90° — in alloy steel with a nano blue coating and 0.1 mm tips, for sign making, lettering and V-groove joints in wood, acrylic, PCB and aluminium.

    Shank diameter
    1/8 in, title and first bullet
    Cutting diameter and length
    0.1 mm tip; angles of 20, 30, 45, 60 and 90°, first and fourth bullets; no lengths
    Flute count
    Absent from the listing
    Helix direction
    Absent from the listing
    End shape
    Five flat and five triangular V-bits, first bullet
    Coating
    Nano blue coating, third bullet; alloy steel, second bullet
    Material suitability
    Hardwood, plywood, acrylic, plastic laminate, resin, PCB and aluminium, fifth bullet
    Amazon reference
    B0C7KPDWY4 (same reference on 6 Amazon marketplaces)
    EAN
    0816550027363
    • Five angles from 20 to 90°, in two tip shapes
    • A 1/8 in shank, the collet size stated for the Genmitsu router reviewed on this site
    • Alloy steel, not carbide

    Best for: A desktop CNC owner with a 1/8 in collet starting on signs, lettering and PCB isolation.

    ≈ $26 / £22 / 27 €
    Check price on Amazon
  • Five 2-flute spiral cutters with an iridescent rainbow coating and plain silver shanks

    HOZLY Carbide compression end mills, 2 flutes, 4 mm shank, 4 mm × 22 mm, DLC, 5 pieces

    Five 2-flute solid carbide compression end mills from HOZLY with an up-cut and down-cut spiral and DLC coating, a 4 mm shank, 4 mm cutting diameter and 22 mm cutting length, for burr-free edges in wood on CNC routers.

    Shank diameter
    4 mm, title
    Cutting diameter and length
    4 mm diameter, 22 mm cutting edge length, title
    Flute count
    2 flutes, title
    Helix direction
    Up-down compression spiral, title and first and third bullets
    End shape
    Absent from the listing
    Coating
    DLC coating on spiral carbide, title
    Material suitability
    Wood, on CNC routers, woodworking machines and advertising routers, title and fifth bullet
    Amazon reference
    B0B5KY43S8 (same reference on 6 Amazon marketplaces)
    EAN
    0631384621378
    • Shank, diameter and cutting length all given
    • Compression spiral for clean top and bottom edges
    • A 4 mm shank does not fit a 1/8 in collet

    Best for: A CNC router owner with a 4 mm collet cutting plywood parts where both faces show.

    ≈ $42 / £36 / 40 €
    Check price on Amazon

All breadboards and jumper wires