Skip to content

A board that links to the next one

CyConncet Solderless breadboard 5.4 × 16.5 cm with two distribution strips

A solderless breadboard from CyConncet, 5.4 × 16.5 × 0.85 cm in ABS, with nickel-plated phosphor bronze spring clips, two distribution strips, top and bottom rows connected horizontally and the rest vertically, for 0.8 mm jumper wires, and joinable with other units.

Long white solderless breadboard with red and blue rail lines along both edges, beside a bundle of flexible jumper wires

CyConncet Solderless breadboard 5.4 × 16.5 cm with two distribution strips

A solderless breadboard from CyConncet, 5.4 × 16.5 × 0.85 cm in ABS, with nickel-plated phosphor bronze spring clips, two distribution strips, top and bottom rows connected horizontally and the rest vertically, for 0.8 mm jumper wires, and joinable with other units.

Tie points
Two distribution strips, 200 jacks, first bullet
Power rails
Top and bottom rows connected horizontally and split in the middle, fourth bullet
Contact quality
Nickel-plated phosphor bronze spring clips, first bullet
Backing
Absent from the listing — ABS plastic, joinable by units, second and fifth bullets
Wire types and lengths
Absent from the listing — matching jumper wire diameter 0.8 mm, first and second bullets
Gauge
0.8 mm wire diameter, second bullet
Pack contents
Absent from the listing text — board size 5.4 × 16.5 × 0.85 cm, first bullet; the product photograph shows the board with a bundle of flexible jumper wires
Amazon reference
B0D3BZBHVS (same reference on 6 Amazon marketplaces)
EAN
0784633677708
  • Nickel-plated phosphor bronze contacts
  • Board size given: 5.4 × 16.5 × 0.85 cm
  • Rails split in the middle

Best for: A beginner prototyping small circuits who may join boards together later.

≈ 5 €
Check price on Amazon

Specifications

Tie points
Two distribution strips, 200 jacks, first bullet
Power rails
Top and bottom rows connected horizontally and split in the middle, fourth bullet
Contact quality
Nickel-plated phosphor bronze spring clips, first bullet
Backing
Absent from the listing — ABS plastic, joinable by units, second and fifth bullets
Wire types and lengths
Absent from the listing — matching jumper wire diameter 0.8 mm, first and second bullets
Gauge
0.8 mm wire diameter, second bullet
Pack contents
Absent from the listing text — board size 5.4 × 16.5 × 0.85 cm, first bullet; the product photograph shows the board with a bundle of flexible jumper wires
Amazon reference
B0D3BZBHVS (same reference on 6 Amazon marketplaces)
EAN
0784633677708

The CyConncet breadboard listing, bullet by bullet

Five bullets: two distribution strips with 200 jacks, a 5.4 × 16.5 × 0.85 cm size and nickel-plated phosphor bronze spring clips; 0.8 mm jumper wire and ABS plastic; a description of solderless prototyping; metal strips under the board, top and bottom rows horizontal and split in the middle, the rest vertical; and boards that join by unit.

CyConncet’s split rails

Horizontal rows, split in the middle. On a board like this the power rails do not run the full length. A jumper across the gap joins the two halves.

What CyConncet leaves unclear

“Two distribution strips: 200 jacks” does not say whether 200 is the whole board. The text never lists what is in the pack; the product photograph shows a long board with red and blue rail lines on both edges and a bundle of flexible jumper wires beside it.

Availability

At the last look-up, the German, Italian and Spanish Amazon stores were asking 5 € to 8 €.

The asking price on the French Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American and British Amazon catalogues list the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • Three rainbow jumper wire ribbons, one long and two short, with pin and socket ends

    GERUI Jumper wires 120 pieces, M-F, M-M and F-F, 10 and 20 cm, 28 AWG

    Three 40-wire ribbons of jumper wires from GERUI — male to female, male to male and female to female — in 10 and 20 cm lengths, 28 AWG with PVC insulation and 2.54 mm pitch ends, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Small pins and sockets for 2.54 mm pitch, holding firmly, third and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    40 male-female, 40 male-male and 40 female-female; 10 cm and 20 cm, first and second bullets
    Gauge
    28 AWG, title
    Pack contents
    3 ribbons of 40 wires, 120 in all, title and second bullet
    Amazon reference
    B0DGBYR2YL (same reference on 6 Amazon marketplaces)
    EAN
    0744243857648
    • All three end types
    • Two lengths: 10 and 20 cm
    • “Male to Female” in the title, three types in the box

    Best for: A maker wiring modules to a board or single-board computer GPIO header.

    ≈ 6 €
    Check price on Amazon
  • Three equal-length rainbow jumper ribbons: socket to socket, socket to pin and pin to pin

    ELEGOO Jumper wires 3 × 40, 20 cm, M-M, F-M and F-F

    Three 40-wire ribbons of 20 cm jumper wires from ELEGOO — female to female, male to female and male to male — in many colours for following a circuit, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Absent from the listing
    Backing
    Absent from the listing
    Wire types and lengths
    40 female-female, 40 male-female, 40 male-male; 20 cm, third and fourth bullets
    Gauge
    Absent from the listing
    Pack contents
    3 ribbons of 40 wires, fourth bullet
    Amazon reference
    B01EV70C78 (same reference on 3 Amazon marketplaces)
    EAN
    0719377200424
    • All three end types
    • Many colours for tracing a circuit
    • One length only: 20 cm

    Best for: A breadboard user who wants one length of each wire type from the same maker as their board.

    ≈ $7 / £6 / 7 €
    Check price on Amazon
  • Two 400-point and two 830-point breadboards beside three rainbow jumper ribbons

    HUAREW Breadboard kit: 2 × 830 and 2 × 400 boards, 40-pin F-F, F-M and M-M jumper ribbons

    A breadboard kit from HUAREW with two 830-point and two 400-point breadboards that take 20–29 AWG (0.3–0.8 mm) wire, and 40-pin ribbons of female-female, female-male and male-male jumpers with 10-strand copper conductors.

    Tie points
    2 × 830-point and 2 × 400-point breadboards, fifth bullet
    Power rails
    Absent from the listing
    Contact quality
    Neat pin holes; metal pins that do not bend easily, first bullet
    Backing
    Absent from the listing
    Wire types and lengths
    40-pin F2F, F2M and M2M ribbons, fifth bullet; 21 cm in the title; 10-strand braided copper in plastic sleeving, third bullet
    Gauge
    Boards accept 20–29 AWG (0.3–0.8 mm) wire, second bullet
    Pack contents
    2 × 830 and 2 × 400 breadboards, 3 × 40-pin jumper ribbons, fifth bullet
    Amazon reference
    B0B5TCKTQH (same reference on 5 Amazon marketplaces)
    EAN
    0762917155524
    • Four breadboards
    • Wire range the boards take: 20–29 AWG
    • Jumper length only in the title

    Best for: A classroom or maker who keeps several circuits built at once.

    ≈ £13 / 13 €
    Check price on Amazon

Elsewhere on the workbench

  • UniTak3D PEI plate, black textured face marked PEI Texture and smooth face marked PEI Smooth

    UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

    A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

    Size and fit
    235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
    Substrate
    Spring steel sheet, second bullet
    Surface type
    Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
    Heat limit
    Textured side to 300 °C, smooth side to 200 °C, third bullet
    Amazon reference
    B08L39BFVJ (same reference on 6 Amazon marketplaces)
    EAN
    0605175679800
    • Separate heat limits for each side: 300 °C textured, 200 °C smooth
    • A long list of Creality printers, including the K1C reviewed on this site
    • No magnetic base mentioned anywhere in the listing

    Best for: A Creality K1C or Ender 3 owner who wants textured PEI for grip and smooth PEI for smooth first layers.

    ≈ £17 / 14 €
    Check price on Amazon
  • YOOPAI green plate printed PLA/PETG and Cool Plate Ultra Tack along its front edge

    YOOPAI Cold plate 257 × 257 mm for Bambu Lab 3D printers, with identification code

    A green 257 × 257 mm cold-print plate for Bambu Lab 3D printers that grips PLA at 45–55 °C and PETG at 50–70 °C, with an identification code for the X1C and X1E, a scraper, and a warning against ABS and TPU.

    Size and fit
    257 × 257 mm for Bambu Lab A1, P2S, X2D, P1P, P1S, X1C and X1E, title and fourth bullet
    Substrate
    Flexible steel plate, third bullet
    Surface type
    Textured cold-print surface, green, title and third bullet; identification code for automatic bed levelling on X1C and X1E, fourth bullet
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA at 45–55 °C and PETG at 50–70 °C; not recommended for ABS or TPU, second bullet
    Heat limit
    Absent from the listing
    Amazon reference
    B0FNMPXGFP (same reference on 6 Amazon marketplaces)
    EAN
    0850078714053
    • Bed temperatures given per material: PLA 45–55 °C, PETG 50–70 °C
    • An identification code for X1C and X1E automatic bed levelling
    • Not recommended for ABS or TPU

    Best for: A Bambu Lab 3D printer owner printing large PLA and PETG parts who wants lower bed temperatures and less warping.

    ≈ $18 / £18 / 15 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 2 to 12 mm, shanks stamped SWT with sizes and HSS-AL

    AFUNTA HSS 4-flute end mill set, titanium coated, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from AFUNTA with titanium coating, straight shanks and a U-shaped flute with a large rake angle, from 2 to 12 mm, for side, end and face milling of steels, cast iron and titanium.

    Shank diameter
    Absent from the listing — straight shank, title
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, fifth bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — U-shaped flute with a large rake angle, third bullet
    End shape
    Absent from the listing
    Coating
    Titanium coating on high-speed steel, second and fourth bullets; the cutters in the product photograph show bright steel with no coating colour
    Material suitability
    Carbon, alloy, die and tool steels, cast iron and titanium, first bullet; wood and aluminium in the title
    Amazon reference
    B07DQL66VF (same reference on 6 Amazon marketplaces)
    EAN
    0783710282415
    • Titanium coating stated
    • Flute shape described: U-shaped, large rake angle
    • No shank sizes or lengths

    Best for: A benchtop mill owner cutting steel who wants coated HSS in common sizes.

    ≈ $17 / £19 / 21 €
    Check price on Amazon

All breadboards and jumper wires