Skip to content

The maker’s own plate, steel only

Creality Official K2 Pro textured PEI plate, 310 × 325 mm, without magnetic base

Creality’s official 310 × 325 mm build plate for the K2 Pro, spring steel with matte PEI powder coating on both sides, suitable for materials from PLA to PA-CF, supplied without its magnetic base.

Creality gold textured PEI plate standing in front of its black Creality box

Creality Official K2 Pro textured PEI plate, 310 × 325 mm, without magnetic base

Creality’s official 310 × 325 mm build plate for the K2 Pro, spring steel with matte PEI powder coating on both sides, suitable for materials from PLA to PA-CF, supplied without its magnetic base.

Size and fit
310 × 325 mm for the Creality K2 Pro, title and first bullet
Substrate
Spring steel, title and first and fifth bullets
Surface type
Textured PEI, matte PEI powder coating on both sides, title and second bullet
Magnetic base
Not included: spring steel plate only, title and first bullet
Filament suitability
PLA, ABS, ASA, PETG, TPU, PC, PA, PLA-CF, PA-CF and PET-CF, fourth bullet
Heat limit
Absent from the listing — the coating is described as heat- and wear-resistant
Amazon reference
B0FM8GFFSX (same reference on 6 Amazon marketplaces)
EAN
0198549081441
  • An official Creality part for the K2 Pro
  • PEI on both sides
  • No magnetic base in the box

Best for: A K2 Pro owner replacing a plate, or adding a second one, from the printer’s own maker.

≈ £19 / 28 €
Check price on Amazon

Specifications

Size and fit
310 × 325 mm for the Creality K2 Pro, title and first bullet
Substrate
Spring steel, title and first and fifth bullets
Surface type
Textured PEI, matte PEI powder coating on both sides, title and second bullet
Magnetic base
Not included: spring steel plate only, title and first bullet
Filament suitability
PLA, ABS, ASA, PETG, TPU, PC, PA, PLA-CF, PA-CF and PET-CF, fourth bullet
Heat limit
Absent from the listing — the coating is described as heat- and wear-resistant
Amazon reference
B0FM8GFFSX (same reference on 6 Amazon marketplaces)
EAN
0198549081441

The Creality K2 Pro plate listing, bullet by bullet

Five bullets: an official Creality textured PEI plate of 310 × 325 mm for the K2 Pro, a spring steel plate only, with no magnetic base; a heat- and wear-resistant matte PEI powder coating on both sides; adhesion that prevents warping at high or low temperatures; suitability for PLA, ABS, ASA, PETG, TPU, PC, PA and three carbon-filled grades; and release by flexing the spring steel several times, with no extra tools.

The Creality plate without its base

Steel only. The title and the first bullet both say so. For an owner replacing a plate on a K2 Pro that already has its base, that is the part needed; it is not a complete plate system.

Carbon-filled grades on the Creality list

PLA-CF, PA-CF and PET-CF are named in the fourth bullet. Of the five plates here, this is the only listing that names carbon-filled filaments.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 28 € to 32 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More build plates

  • MXMONK round gold textured PEI plate in front of a round black sheet

    MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

    A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

    Size and fit
    220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI powder coating on both sides, matte finish, fifth bullet
    Magnetic base
    Strong self-adhesive magnetic sheet (B side) included, sixth bullet
    Filament suitability
    Absent from the listing
    Heat limit
    Absent from the listing — “extreme heat resistance” without a figure, third bullet
    Amazon reference
    B0FWD37X59 (same reference on 5 Amazon marketplaces)
    EAN
    0381504927452
    • The only plate of the five that lists a magnetic sheet in the box
    • Made for a round delta bed, the FLSUN Q5
    • Only for the FLSUN Q5

    Best for: A FLSUN Q5 owner who wants a removable magnetic PEI surface on the original heated bed.

    ≈ $30 / 35 €
    Check price on Amazon
  • TIOPY gold textured PEI spring steel plate with a handling tab

    TIOPY PEI spring steel plate 257 × 257 mm for Bambu Lab 3D printers

    A 257 × 257 mm PEI spring steel plate from TIOPY for Bambu Lab X1, P1, P2S and A1 printers, carrying no QR code, so the printer’s plate detection has to be turned off; its PEI is called smooth in the title and textured in the bullets.

    Size and fit
    257 × 257 mm for Bambu Lab X2D, X1, X1C, X1E, P1P, P1S, P2S and A1, title and first bullet
    Substrate
    Spring steel, title and second and fourth bullets
    Surface type
    “Smooth PEI” in the title; double-sided textured PEI in the first, fourth and fifth bullets, frosted PEI surface in the second; the product photograph shows a gold textured face
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, flexible, wood, ABS, PC, PETG, TPU and nylon, second bullet
    Heat limit
    Can be heated to over 200 °C, second bullet; no upper limit given
    Amazon reference
    B0CBH3B8GT (same reference on 6 Amazon marketplaces)
    EAN
    0738260308610
    • A plain instruction that the plate has no QR code and plate detection must be disabled
    • Named for the Bambu Lab X1, P1, P2S and A1 series
    • Smooth in the title, textured in the bullets

    Best for: A Bambu Lab X1, P1 or A1 owner who wants a spare PEI plate and can do without automatic plate detection.

    ≈ 14 €
    Check price on Amazon
  • UniTak3D PEI plate, black textured face marked PEI Texture and smooth face marked PEI Smooth

    UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

    A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

    Size and fit
    235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
    Substrate
    Spring steel sheet, second bullet
    Surface type
    Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
    Heat limit
    Textured side to 300 °C, smooth side to 200 °C, third bullet
    Amazon reference
    B08L39BFVJ (same reference on 6 Amazon marketplaces)
    EAN
    0605175679800
    • Separate heat limits for each side: 300 °C textured, 200 °C smooth
    • A long list of Creality printers, including the K1C reviewed on this site
    • No magnetic base mentioned anywhere in the listing

    Best for: A Creality K1C or Ender 3 owner who wants textured PEI for grip and smooth PEI for smooth first layers.

    ≈ £17 / 14 €
    Check price on Amazon

Elsewhere on the workbench

  • Eight dark-coated 4-flute end mills standing in blue plastic caps, one in a clear tube

    ASZLBYM Carbide 4-flute end mill set, 8 pieces, 2–12 mm

    Eight 4-flute end mills from ASZLBYM in tungsten carbide stated at HRC45, from 2 to 12 mm, with a negative rake edge, a large core for rigidity and large flutes for chip clearance, sold for metalworking and CNC machining, with HSS also in the title.

    Shank diameter
    Absent from the listing
    Cutting diameter and length
    2, 3, 4, 5, 6, 8, 10 and 12 mm, first bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Square (“Vierkant”), fourth bullet
    Coating
    Absent from the listing text — tungsten carbide stated at HRC45, second bullet, “HSS” also in the title; the product photograph shows dark-coated flutes
    Material suitability
    Metalworking, CNC machining and mechanical engineering, fourth bullet
    Amazon reference
    B0C55FBCNP (same reference on 6 Amazon marketplaces)
    EAN
    0739240119172
    • Tungsten carbide described, with its composition
    • Large core and large flutes, as the third and fourth bullets say
    • HSS and carbide both in the title

    Best for: A benchtop mill owner who wants carbide cutters and can confirm the material and shank sizes on arrival.

    ≈ 52 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 2 to 12 mm beside a blue case, shanks stamped SWT with sizes and HSS-AL

    ASNOMY HSS 4-flute end mill set, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from ASNOMY with straight shanks, from 2 to 12 mm, for profile, shoulder and finish milling of ferrous and non-ferrous metals, plastics and wood.

    Shank diameter
    Absent from the listing text — the shanks in the product photograph are stamped with 6, 8, 10 and 12 mm shank sizes, as in 12×12×26×83
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, second bullet; lengths only on the stamped shanks in the photograph
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel, first bullet
    Material suitability
    Aluminium, cast iron, copper, magnesium alloys, plastics and wood, third bullet
    Amazon reference
    B089VWBZY2 (same reference on 6 Amazon marketplaces)
    EAN
    0747045238394
    • Sizes up to 12 mm
    • Milling operations named: profile, shoulder and finishing
    • No shank sizes or lengths

    Best for: A benchtop milling machine owner who needs larger cutters than a desktop router collet takes.

    ≈ $16 / £15 / 19 €
    Check price on Amazon
  • Ten blue-coated engraving bits on silver shanks, five round-ground V-points and five flat triangular tips

    Genmitsu V-bit and flat engraving bit set, 10 pieces, 1/8 in shank, 20–90°

    Ten engraving bits from Genmitsu on 1/8 in shanks — five flat and five triangular V-bits at 20, 30, 45, 60 and 90° — in alloy steel with a nano blue coating and 0.1 mm tips, for sign making, lettering and V-groove joints in wood, acrylic, PCB and aluminium.

    Shank diameter
    1/8 in, title and first bullet
    Cutting diameter and length
    0.1 mm tip; angles of 20, 30, 45, 60 and 90°, first and fourth bullets; no lengths
    Flute count
    Absent from the listing
    Helix direction
    Absent from the listing
    End shape
    Five flat and five triangular V-bits, first bullet
    Coating
    Nano blue coating, third bullet; alloy steel, second bullet
    Material suitability
    Hardwood, plywood, acrylic, plastic laminate, resin, PCB and aluminium, fifth bullet
    Amazon reference
    B0C7KPDWY4 (same reference on 6 Amazon marketplaces)
    EAN
    0816550027363
    • Five angles from 20 to 90°, in two tip shapes
    • A 1/8 in shank, the collet size stated for the Genmitsu router reviewed on this site
    • Alloy steel, not carbide

    Best for: A desktop CNC owner with a 1/8 in collet starting on signs, lettering and PCB isolation.

    ≈ $26 / £22 / 27 €
    Check price on Amazon

All build plates