Antinsky nFEP (PFA) film 280 × 450 mm, 0.15 mm, for large resin printers

The Antinsky nFEP listing, bullet by bullet

Five bullets: an improved version of FEP with up to 95 % light transmission, stable at 260 °C with a 305 °C melting point, and less pull on each layer; higher tensile strength and elongation at break for a longer life; better peeling and less deformation for large SLA and LCD printers; faster printing from higher UV transmission; and a sheet of 450 × 280 × 0.15 mm for the Sonic Mega 8K, Transform, Anycubic M3 Max and printers within 11 × 17.7 inches.

A sheet for large vats

280 × 450 mm covers large-format resin printers. It is the only film here sized beyond A4, and the printers it names are the big machines of their brands.

One number disagrees

The part number reads 250*450, against 280 × 450 mm in the title and bullet. The tube in the product photograph reads 280 × 450 mm, which matches the title. A 30 mm difference decides whether a sheet can be tensioned across a vat, so measuring before fitting is still sensible.

Figures with a source missing

260 °C and 305 °C are specific. Neither comes with a standard or a condition, and the page reports them as stated.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 26 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.