Skip to content

Six sheets and the instructions on the box

KOYOFEI FEP film 140 × 200 mm, 0.15 mm, 6 sheets

Six 140 × 200 × 0.15 mm FEP sheets from KOYOFEI for resin printers including the Mars 2 and 3 series, Photon Mono, Mono 4K and Halot One, with 95 % light transmission stated and instructions printed on the packaging.

KOYOFEI pack of FEP film sheets

KOYOFEI FEP film 140 × 200 mm, 0.15 mm, 6 sheets

Six 140 × 200 × 0.15 mm FEP sheets from KOYOFEI for resin printers including the Mars 2 and 3 series, Photon Mono, Mono 4K and Halot One, with 95 % light transmission stated and instructions printed on the packaging.

Sheet size
140 × 200 mm, title and first bullet
Thickness
0.15 mm, title and first bullet
Material
FEP, title
Pre-mounted frames
Absent from the listing
Pack count
6 sheets, title
Printer fit
Mars, Mars Pro, Mars 2, Mars 2 Pro, Mars 3, Mars 3 Pro, Photon Mono, Mono 4K, Halot One, LD-002R and LD-002H, first bullet
Amazon reference
B091MYV2WD (same reference on 6 Amazon marketplaces)
EAN
8424511433003
  • Six sheets in a pack
  • Replacement instructions printed on the packaging
  • Unframed sheets

Best for: An owner of a Mars 2 or 3, Photon Mono or Halot One who changes film often.

≈ $10
Check price on Amazon

Specifications

Sheet size
140 × 200 mm, title and first bullet
Thickness
0.15 mm, title and first bullet
Material
FEP, title
Pre-mounted frames
Absent from the listing
Pack count
6 sheets, title
Printer fit
Mars, Mars Pro, Mars 2, Mars 2 Pro, Mars 3, Mars 3 Pro, Photon Mono, Mono 4K, Halot One, LD-002R and LD-002H, first bullet
Amazon reference
B091MYV2WD (same reference on 6 Amazon marketplaces)
EAN
8424511433003

The KOYOFEI FEP listing, bullet by bullet

Five bullets: compatibility with the Mars, Mars Pro, Mars 2, Mars 2 Pro, Mars 3, Mars 3 Pro, Photon Mono, Mono 4K, Halot One and LD-002R and LD-002H, and a size of 140 × 200 × 0.15 mm; non-stick, low-friction properties; 95 % light transmission; heat resistance and durability; and instructions printed on the packaging.

Six sheets instead of two

The same sheet size as the UniTak3D film, three times the count. FEP scratches and clouds with use, and a pack of six covers several changes.

Instructions where they are needed

Changing FEP means tensioning it evenly in the vat frame. Printing the steps on the box is a small, useful detail the other films here do not all offer.

A fit list that stops at the Mars 3

The Mars 5 reviewed on this site is not among the printers named. Owners of newer printers should check their vat size before ordering.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 15 € to 19 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More FEP and release films

  • Phrozen nFEP PFA release film sheet

    Phrozen PFA (nFEP) release film, A4, 210 × 290 mm, 1 sheet

    A single A4 sheet of Phrozen nFEP release film, made of PFA, for Phrozen printers from the Sonic Mini 8K S to the Shuffle series, described as releasing prints more easily and resisting heat better than ordinary FEP.

    Sheet size
    210 × 290 mm, A4 format, title
    Thickness
    Absent from the listing
    Material
    PFA, sold as nFEP, title and second bullet
    Pre-mounted frames
    Absent from the listing
    Pack count
    1 sheet, title
    Printer fit
    Phrozen Sonic Mini 8K S, Sonic Mini 8K, Sonic Mighty 4K, Sonic 4K 2022, Sonic Mini 4K, Sonic 4K, Shuffle 4K, Sonic Mini, Sonic, Shuffle Lite, Shuffle 2019 and 2018, Phrozen Make, first bullet
    Amazon reference
    B092V2NRSG (same reference on 5 Amazon marketplaces)
    EAN
    4711117880107
    • Made by Phrozen for its own printers, including the Sonic Mini 8K S reviewed here
    • PFA film described as releasing prints more easily than FEP
    • A single sheet

    Best for: A Sonic Mini 8K S or other Phrozen owner replacing the vat film with the maker’s own PFA.

    ≈ 24 €
    Check price on Amazon
  • UniTak3D FEP film sheets for resin 3D printers

    UniTak3D FEP film 140 × 200 mm, 2 sheets

    Two FEP sheets from UniTak3D, 140 × 200 mm and 0.15 mm thick, for 5.5-inch resin printers such as the Photon, Photon S, Mars and Mars 2 Pro, stated to transmit over 95 % of light and resist 204 °C.

    Sheet size
    140 × 200 mm, title and fifth bullet
    Thickness
    0.15 mm, fifth bullet; the box in the product photograph reads 0.127 mm
    Material
    FEP, title
    Pre-mounted frames
    Absent from the listing
    Pack count
    2 sheets, title
    Printer fit
    ELEGOO Mars, Anycubic Photon and Photon S, Mars 2 Pro, LD-002R and LD-002H, Wanhao Duplicator 7, Monoprice Mini Deluxe SLA, EPAX X1, QIDI Tech, Longer Orange and other 5.5-inch printers, title and fourth bullet
    Amazon reference
    B0872BNB9Y (same reference on 6 Amazon marketplaces)
    EAN
    0605175677165
    • Sheet size and thickness published
    • A long list of named 5.5-inch printers
    • Only two sheets, with 0.15 mm in the text and 0.127 mm on the photographed box

    Best for: Replacing the film on an older 5.5-inch resin printer from the named list.

    ≈ 10 €
    Check price on Amazon
  • Antinsky large nFEP PFA film sheet

    Antinsky nFEP (PFA) film 280 × 450 mm, 0.15 mm, for large resin printers

    A single 280 × 450 × 0.15 mm nFEP (PFA) sheet from Antinsky for large resin printers including the Phrozen Sonic Mega 8K and Anycubic M3 Max, stated to transmit up to 95 % of UV light and to work at 260 °C.

    Sheet size
    280 × 450 mm in the title and fifth bullet; the part number reads 250*450
    Thickness
    0.15 mm, fifth bullet
    Material
    PFA, sold as nFEP, title and first bullet
    Pre-mounted frames
    Absent from the listing
    Pack count
    1 sheet, title
    Printer fit
    Phrozen Sonic Mega 8K, Transform, Anycubic M3 Max, Creality Halot Mage Pro and resin printers within 11 × 17.7 inches, title and fifth bullet
    Amazon reference
    B0B2MLDTWL (same reference on 6 Amazon marketplaces)
    EAN
    0768488084119
    • The largest sheet here, for printers up to 11 × 17.7 inches
    • Heat figures published: stable at 260 °C, melting point 305 °C
    • A single sheet for large and expensive vats

    Best for: An owner of a large-format resin printer from the named list who wants PFA rather than FEP.

    ≈ $26 / £26 / 26 €
    Check price on Amazon

Elsewhere on the workbench

  • Six transparent boxes stacked in two rows, each holding a spool with a kraft label reading PLA, PETG or TPU

    YOOPAI Filament storage boxes 4.0 L, 6 pack, with desiccant and labels

    Six 4.0 L filament storage boxes from YOOPAI, 24.6 × 24.1 × 11.2 cm each, described as waterproof and dust-protected, with desiccant and labels for PLA, PETG, ABS and TPU.

    Capacity and spool fit
    4.0 L per box, 24.6 × 24.1 × 11.2 cm; 1.75 mm filaments, first, fourth and fifth bullets; no spool size given
    Seal type
    Absent from the listing — waterproof and dust-protected construction, second bullet
    Desiccant method
    Desiccant included, amount and type not given, second bullet
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    Set of 6 portable boxes with labels for PLA, PETG, ABS and TPU, first, third and fourth bullets
    Amazon reference
    B0F8B8C9Q6 (same reference on 6 Amazon marketplaces)
    EAN
    0850075053483
    • Box dimensions given: 24.6 × 24.1 × 11.2 cm
    • Six boxes in the set
    • No seal description

    Best for: A maker needing six boxes who can check the 24.6 × 24.1 × 11.2 cm dimensions against their spools.

    ≈ $34 / £28 / 30 €
    Check price on Amazon
  • Four tall transparent boxes with flip-up lids holding spools, three sheets of black labels, a white marker and eight silica gel packs

    Saccik Airtight filament dry boxes 4.0 L, 4 pack, with colour-change silica gel

    Four stackable 4.0 L filament boxes from Saccik with silicone seals and no hygrometer holes, two packs of colour-change silica gel per box, 24 wipeable labels and a marker, sized for standard 1 kg spools.

    Capacity and spool fit
    4.0 L, for standard 1 kg spools of plastic or cardboard, title and fourth bullet
    Seal type
    Silicone seal, seamless design, first bullet
    Desiccant method
    Two packs of silica gel per box, orange to green when saturated, regenerated in a microwave according to the second bullet
    Hygrometer
    None, by design: no holes drilled for one, first bullet
    Feed-through ports
    Absent from the listing
    Format
    4 modular, stackable boxes of transparent PLA plastic, 8 desiccant packs, 24 wipeable labels and 1 marker, fifth bullet
    Amazon reference
    B0GXP42TS9 (same reference on 5 Amazon marketplaces)
    EAN
    4897154280015
    • Reusable colour-change silica gel, two packs per box
    • Labels and a marker for an inventory
    • No hygrometer, so humidity is read only from the gel colour

    Best for: A maker organising a shelf of 1 kg spools between uses who prefers colour-change gel to a digital gauge.

    ≈ 23 €
    Check price on Amazon
  • Stack of white glue sticks with two lying across the top

    AUXHCYL EVA hot glue sticks 7 × 100 mm, 200 pieces, clear

    Two hundred clear hot glue sticks from AUXHCYL in EVA resin, 7 × 100 mm, elastic and solvent-free, for 7 mm glue guns and materials from paper and card to wood, plastic, ceramics, glass and rubber.

    Diameter
    7 mm, title and first and third bullets
    Length
    100 mm, title and first bullet
    Melt grade
    Absent from the listing — EVA resin, first bullet
    Material suitability
    Paper, card, wood, plastic, feathers, shells, ceramics, glass and rubber, fifth bullet
    Open time
    Absent from the listing — fast-drying, fourth bullet
    Colour
    White and transparent, second bullet
    Count
    200 sticks, title and fifth bullet
    Net weight
    Absent from the listing
    Amazon reference
    B0CR5QDRZK (same reference on 5 Amazon marketplaces)
    EAN
    0710436214925
    • The largest count of the seven: 200 sticks
    • EVA resin named
    • Short 100 mm sticks

    Best for: A classroom or craft group using many 7 mm glue guns at once.

    ≈ 10 €
    Check price on Amazon

All FEP and release films