Skip to content

A wash count on the roll

Cricut Iron-On heat transfer vinyl roll 30.5 cm × 1.5 m, black

A black 30.5 cm × 1.5 m roll of Cricut Iron-On heat transfer vinyl for Cricut cutting machines, for T-shirts, jackets and backpacks, stated to withstand 25+ washes and sold in simplified value packaging.

Black roll on a kraft Cricut box labelled Value Iron-On, 5 ft

Cricut Iron-On heat transfer vinyl roll 30.5 cm × 1.5 m, black

A black 30.5 cm × 1.5 m roll of Cricut Iron-On heat transfer vinyl for Cricut cutting machines, for T-shirts, jackets and backpacks, stated to withstand 25+ washes and sold in simplified value packaging.

Press temperature
Absent from the listing
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
Absent from the listing as fabrics — T-shirts, jackets and backpacks named, second bullet
Finish
Absent from the listing — black, title and first bullet
Size
30.5 cm × 1.5 m roll, title and first bullet
Wash advice
Absent from the listing as advice — withstands 25+ washes, third bullet
Amazon reference
B0D96PC26K (same reference on 6 Amazon marketplaces)
EAN
0093573709296
  • A wash durability figure: 25+ washes
  • Made for Cricut cutting machines
  • No temperature, time or peel settings

Best for: A Cricut cutting machine owner making a few black designs for shirts and bags.

≈ $10 / £9 / 9 €
Check price on Amazon

Specifications

Press temperature
Absent from the listing
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
Absent from the listing as fabrics — T-shirts, jackets and backpacks named, second bullet
Finish
Absent from the listing — black, title and first bullet
Size
30.5 cm × 1.5 m roll, title and first bullet
Wash advice
Absent from the listing as advice — withstands 25+ washes, third bullet
Amazon reference
B0D96PC26K (same reference on 6 Amazon marketplaces)
EAN
0093573709296

The Cricut Iron-On vinyl listing, bullet by bullet

Five bullets: one black roll of 30.5 cm × 1.5 m; uses on T-shirts, jackets and backpacks; durability through 25+ washes; fine designs easy to cut and weed; and value packaging combining the benefits of Cricut Everyday Iron-On.

Cricut’s 25 washes

A number where others say washable. The third bullet is the only one in this family to give a wash count. It comes without the press settings that decide how well the vinyl bonds in the first place.

Cricut and its machines

The roll is made for all Cricut cutting machines. The Cricut Joy 2 reviewed on this site is not named individually, and no press settings appear on the page.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 9 € to 10 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More heat transfer vinyl

  • Forty-two coloured vinyl sheets fanned in a circle around a 42 sheets label, with two printed T-shirts

    EOPUOZS Heat transfer vinyl sheets 30.5 × 20.1 cm, 42 sheets, 24 colours

    Forty-two sheets of heat transfer vinyl from EOPUOZS, 30.5 × 20.1 cm in 24 colours, cut on a cutting machine and pressed with an iron or heat press for 10–15 seconds, with advice to wait 24 hours before the first wash and turn garments inside out.

    Press temperature
    Absent from the listing
    Press time and pressure
    10–15 seconds with an iron or heat press, third bullet; pressure not given
    Peel
    Absent from the listing
    Compatible fabrics
    Absent from the listing as fabrics — T-shirts, sportswear, aprons, caps and bags named, fourth bullet
    Finish
    24 colours, first bullet
    Size
    42 sheets of 30.5 × 20.1 cm, title and first bullet
    Wash advice
    Wait 24 hours before the first wash and turn the fabric inside out, second bullet
    Amazon reference
    B0FSL83861 (same reference on 4 Amazon marketplaces)
    EAN
    0769464574020
    • A press time given: 10–15 seconds
    • Wash advice: 24 hours before the first wash, inside out
    • No temperature, so the time alone is not a setting

    Best for: A plotter owner making small multicolour designs who wants many colours rather than long rolls.

    ≈ 13 €
    Check price on Amazon
  • HERMA T-Shirt Folie pack, A4 10 sheets, No. 4524, marked inkjet print and machine washable up to 40 °C

    HERMA Inkjet iron-on transfer paper for light textiles, A4, 10 sheets

    Ten A4 iron-on transfer sheets from HERMA for inkjet printers, for printing designs onto white and light textiles such as T-shirts, hoodies and cushion covers; a printable transfer paper rather than a vinyl for cutting, and not for laser printers or copiers.

    Press temperature
    Absent from the listing
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    White and light textiles: T-shirts, sweatshirts, hoodies, cushion covers, tote bags, second and fifth bullets
    Finish
    Absent from the listing — printable white transfer sheet, fifth bullet
    Size
    A4, 21 × 29.7 cm, 10 sheets, fifth bullet
    Wash advice
    Absent from the listing text — the pack in the product photograph reads machine washable up to 40 °C
    Amazon reference
    B0BS6THLRP (same reference on 6 Amazon marketplaces)
    EAN
    4008705045247
    • Designs are printed, so no cutting machine is needed
    • A clear printer limit: inkjet only
    • No temperature, time or peel detail; wash temperature only on the pack

    Best for: Someone with an inkjet printer and an iron who wants a photo or full-colour design on a white T-shirt.

    ≈ £12 / 9 €
    Check price on Amazon
  • White vinyl roll unrolled in front of a person in a black T-shirt printed lucky

    KEWUZY PU heat transfer vinyl roll 30.5 cm × 5 m, white

    A white 30.5 cm × 5 m roll of polyurethane heat transfer vinyl from KEWUZY for common cutting plotters, applied with an iron or heat press, for cotton, polyester, rayon, viscose and cotton-polyester blends, with advice to wash garments inside out.

    Press temperature
    Absent from the listing — “high temperature” without a figure, third bullet
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    Most cotton, polyester, rayon, viscose and cotton-polyester blends, fourth bullet
    Finish
    Absent from the listing — white polyurethane, title and first bullet
    Size
    30.5 × 500 cm roll, title and fifth bullet
    Wash advice
    Turn the garment inside out to protect the design, third bullet
    Amazon reference
    B0BZCP93HB (same reference on 5 Amazon marketplaces)
    EAN
    0701631778084
    • Five metres on one roll
    • Fabrics named: cotton, polyester, rayon, viscose and blends
    • No press temperature, time or peel

    Best for: A plotter owner making a run of white designs on cotton or polyester garments.

    ≈ 11 €
    Check price on Amazon

Elsewhere on the workbench

  • Three black ribbed aluminium slat modules side by side, with a watch and leather straps laid on them

    Ophiner Modular aluminium slat bed 400 × 300 mm, three 400 × 100 mm modules

    A modular laser bed from Ophiner made of three 400 × 100 mm modules of 3 mm black-anodised aluminium slats, forming a 400 × 300 mm working area, with single modules replaceable and engraver brands from xTool to Ortur named.

    Working area
    400 × 300 mm effective, from three 400 × 100 mm modules, first and fourth bullets
    Height and focus
    Absent from the listing
    Cell size
    Absent from the listing — open slat structure rather than cells, second and third bullets
    Frame and backing
    3 mm aluminium, black anodised, fifth bullet; no backing plate mentioned
    Hold-downs
    Absent from the listing
    Compatibility
    xTool, Atomstack, Algolaser, Creality, Sculpfun, Ortur and other open laser engravers, fourth bullet
    Amazon reference
    B0GWHBTV6Z (same reference on 5 Amazon marketplaces)
    EAN
    0794969921857
    • Modules replaceable one at a time
    • Slats with a small contact area, stated to avoid honeycomb marks
    • No height given

    Best for: An open-frame diode engraver owner who cuts through often and wants to replace worn sections separately.

    ≈ 50 €
    Check price on Amazon
  • Black TWO TREES honeycomb bed with edge scales to 250 mm, a silver plate behind it and four triangular corner pieces

    Twotrees Aluminium honeycomb bed 300 × 300 × 22 mm, 260 × 260 mm working area

    A 300 × 300 × 22 mm riveted aluminium honeycomb bed from Twotrees with a centre support and a same-size aluminium plate underneath, whose perforated working area is 260 × 260 mm.

    Working area
    260 × 260 mm perforated area on a 300 × 300 mm bed, title and fourth bullet
    Height and focus
    22 mm thick, title and fourth bullet
    Cell size
    Absent from the listing
    Frame and backing
    Riveted aluminium with a centre support structure, first bullet; aluminium plate of the same size underneath, third bullet
    Hold-downs
    Absent from the listing text — the product photograph shows four triangular corner pieces and edge scales marked to 250 mm
    Compatibility
    Absent from the listing — laser engravers in general, title
    Amazon reference
    B0B1P5K9J4 (same reference on 5 Amazon marketplaces)
    EAN
    0760606089136
    • The real working area stated: 260 × 260 mm
    • An aluminium plate underneath to shield the table
    • Working area 40 mm smaller each way than the bed

    Best for: A diode engraver owner whose projects fit inside 260 × 260 mm and who wants a backing plate included.

    ≈ £43 / 39 €
    Check price on Amazon
  • Anycubic Vyper hotend with finned heatsink, heater block, brass nozzle, plugged cable and a white PTFE tube

    ANYCUBIC Vyper hotend, V5 J-head with Volcano nozzle, 24 V ceramic heater

    A replacement V5 J-head hotend with a Volcano nozzle and 24 V ceramic heater cartridge for the Anycubic Vyper, Kobra Max and Kobra Plus 3D printers, with plug-in thermistor and heater and a note on what to check if an NTC error appears.

    Printer fit
    Only Anycubic Vyper, Kobra Max and Kobra Plus; not Kobra Neo or Kobra Go, first bullet
    Maximum temperature
    Absent from the listing
    Heat break
    Absent from the listing — V5 J-head in the title
    Nozzle standard
    Volcano brass nozzle, title and second and fifth bullets; size absent from the listing
    Heater and thermistor
    24 V ceramic heater cartridge, title; thermistor and heater both supplied with a plug, third bullet
    Cooling
    Absent from the listing text — the product photograph shows a finned silver heatsink
    Melt zone
    Volcano design, said to heat the print head evenly, second bullet; no length given
    Amazon reference
    B09DKQ98L3 (same reference on 6 Amazon marketplaces)
    EAN
    0770490052598
    • The printers it does not fit are named: Kobra Neo and Kobra Go
    • Plug-in thermistor and heater, no wiring
    • No temperature figure

    Best for: An Anycubic Vyper, Kobra Max or Kobra Plus owner replacing the hotend with a plug-in part.

    ≈ 8 €
    Check price on Amazon

All heat transfer vinyl