Skip to content

Five metres of white

KEWUZY PU heat transfer vinyl roll 30.5 cm × 5 m, white

A white 30.5 cm × 5 m roll of polyurethane heat transfer vinyl from KEWUZY for common cutting plotters, applied with an iron or heat press, for cotton, polyester, rayon, viscose and cotton-polyester blends, with advice to wash garments inside out.

White vinyl roll unrolled in front of a person in a black T-shirt printed lucky

KEWUZY PU heat transfer vinyl roll 30.5 cm × 5 m, white

A white 30.5 cm × 5 m roll of polyurethane heat transfer vinyl from KEWUZY for common cutting plotters, applied with an iron or heat press, for cotton, polyester, rayon, viscose and cotton-polyester blends, with advice to wash garments inside out.

Press temperature
Absent from the listing — “high temperature” without a figure, third bullet
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
Most cotton, polyester, rayon, viscose and cotton-polyester blends, fourth bullet
Finish
Absent from the listing — white polyurethane, title and first bullet
Size
30.5 × 500 cm roll, title and fifth bullet
Wash advice
Turn the garment inside out to protect the design, third bullet
Amazon reference
B0BZCP93HB (same reference on 5 Amazon marketplaces)
EAN
0701631778084
  • Five metres on one roll
  • Fabrics named: cotton, polyester, rayon, viscose and blends
  • No press temperature, time or peel

Best for: A plotter owner making a run of white designs on cotton or polyester garments.

≈ 11 €
Check price on Amazon

Specifications

Press temperature
Absent from the listing — “high temperature” without a figure, third bullet
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
Most cotton, polyester, rayon, viscose and cotton-polyester blends, fourth bullet
Finish
Absent from the listing — white polyurethane, title and first bullet
Size
30.5 × 500 cm roll, title and fifth bullet
Wash advice
Turn the garment inside out to protect the design, third bullet
Amazon reference
B0BZCP93HB (same reference on 5 Amazon marketplaces)
EAN
0701631778084

The KEWUZY vinyl listing, bullet by bullet

Five bullets: polyurethane described as non-toxic, flexible and soft; easy cutting on common plotters and application with an iron or heat press; strong adhesion after pressing at high temperature, with advice to wash inside out; use on cotton, polyester, rayon, viscose and blends; and a 30.5 × 500 cm roll with 24-hour support and a two-year warranty.

KEWUZY names the material

Polyurethane. PU vinyl is the soft, stretchy kind used on garments. The first bullet names it; the Cricut roll on this site does not say what its vinyl is.

What KEWUZY does not give

“High temperature” is the only press setting. A buyer needs the temperature, time and whether to peel hot or cold before the first shirt.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 11 € to 13 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More heat transfer vinyl

  • Coloured vinyl sheets fanned in a circle, black and white among them

    NANAPLUMS Heat transfer vinyl sheets 30.5 × 25.4 cm, 30 sheets, 18 colours

    Thirty sheets of heat transfer vinyl from NANAPLUMS in 18 colours, 30.5 × 25.4 cm, with a transparent carrier that makes small lettering easier to weed, applied with an iron or heat press to cotton, polyester, viscose, rayon and blends, and best washed inside out.

    Press temperature
    Absent from the listing
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    Cotton, polyester, viscose, rayon and cotton-poly blends, fifth bullet
    Finish
    18 colours with a transparent carrier, title and second bullet
    Size
    30 sheets of 30.5 × 25.4 cm, called A4 in the first bullet, title and first bullet
    Wash advice
    Washing inside out is better, fourth bullet
    Amazon reference
    B08T5Z3CQJ (same reference on 6 Amazon marketplaces)
    EAN
    6970834334852
    • A transparent carrier for weeding small text
    • Fabrics named, blends included
    • No temperature, time or peel

    Best for: A plotter owner cutting small, detailed lettering in several colours for garments.

    ≈ 18 €
    Check price on Amazon
  • UIOK heat transfer paper pack for light and white 30–100 % cotton fabrics, showing hand-drawn, laser and inkjet icons

    UIOK Printable iron-on transfer paper for light fabrics, 15 sheets, with 3 Teflon sheets

    Fifteen sheets of printable iron-on transfer paper from UIOK for inkjet or laser printers or drawing by hand, with three reusable Teflon sheets, pressed at 165–185 °C for 15–20 seconds under strong pressure onto white and light fabrics, with the first wash after 24 hours.

    Press temperature
    165–185 °C (329–365 °F), fourth bullet
    Press time and pressure
    15–20 seconds, strong pressure, fourth bullet
    Peel
    Peel the printed image from its backing, place it printed side up and cover with Teflon paper before pressing; no mirroring needed, fourth bullet
    Compatible fabrics
    White and light fabrics including nylon, canvas, lycra and polyester-cotton blends with 30–100 % cotton, second bullet
    Finish
    Absent from the listing — printable transfer paper for inkjet, laser or hand drawing, first bullet
    Size
    15 sheets of 8.5 × 11 in and 3 reusable Teflon sheets, second bullet; A4 in the title
    Wash advice
    First wash 24 hours after the transfer, third bullet
    Amazon reference
    B0C9M2D9JZ (same reference on 5 Amazon marketplaces)
    EAN
    0701213727660
    • Temperature, time and pressure all given
    • Inkjet, laser printer or hand drawing
    • A4 in the title, 8.5 × 11 in in the bullets

    Best for: Someone with a heat press and either printer type who wants full settings for a printed design on a light shirt.

    ≈ £16 / 17 €
    Check price on Amazon
  • Back of the AVERY Zweckform pack: multilingual instructions, free design templates and a range table listing MD1010, A4, 20 sheets

    AVERY Zweckform Inkjet iron-on transfer sheets for light cotton textiles, A4, 20 sheets

    Twenty A4 iron-on transfer sheets from AVERY Zweckform, MD1010, for inkjet printers and white or light cotton textiles, printed, ironed on and stated to be machine-washable at 30 °C, with an online designer of more than 120 motifs.

    Press temperature
    Absent from the listing
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    White or light cotton T-shirts, textiles and textile decor, first bullet
    Finish
    Absent from the listing — printable transfer sheet for inkjet printers, title
    Size
    A4, 210 × 297 mm, 20 sheets, title and first and second bullets
    Wash advice
    Machine-washable at 30 °C; follow the care instructions, second and third bullets
    Amazon reference
    B0862X6PJ3 (same reference on 5 Amazon marketplaces)
    EAN
    4004182050408
    • A wash temperature: 30 °C
    • Twenty sheets
    • No temperature, time or peel in the bullets

    Best for: Someone printing designs at home onto light cotton shirts who wants a wash temperature stated.

    ≈ £13 / 18 €
    Check price on Amazon

Elsewhere on the workbench

  • Black finned hotend with silver heater block, brass nozzle, red-sleeved heater wires and a blue braided thermistor lead

    BZ 3D Vyper all-metal hotend kit, 24 V 40 W, Volcano V5, bi-metal heat break, 0.4 mm

    An all-metal Volcano V5 J-head hotend kit from BZ 3D for Anycubic Vyper, Kobra Max and Kobra Plus 3D printers, with a titanium and copper bi-metal heat break, aluminium block, 0.4 mm brass nozzle, 24 V 40 W heater and an NTC100K B3950 thermistor rated to read up to 300 °C.

    Printer fit
    Anycubic Vyper, Kobra Max and Kobra Plus, title
    Maximum temperature
    Absent from the listing as a hotend rating — the thermistor reaches up to 300 °C in measurement, fifth bullet
    Heat break
    Bi-metal: titanium alloy to reduce upward heat conduction, copper for dissipation, second and fourth bullets
    Nozzle standard
    Volcano V5 J-head, brass nozzle 0.4 mm with a stated 0.01 mm tolerance, for 1.75 mm PLA, ABS, TPU and PA, title and first bullet
    Heater and thermistor
    24 V 40 W heater, title; NTC100K B3950 thermistor, 3 × 5.5 mm, about 100 mm total length, fifth bullet
    Cooling
    Absent from the listing text — the product photograph shows a black finned heatsink
    Melt zone
    Absent from the listing — Volcano V5 and aluminium heater block, title
    Amazon reference
    B0DFY9KSX6 (same reference on 6 Amazon marketplaces)
    EAN
    0747086755584
    • A titanium and copper heat break, with each metal’s role stated
    • Thermistor type and dimensions given
    • The 300 °C figure is the thermistor’s measuring limit

    Best for: An Anycubic Vyper, Kobra Max or Kobra Plus owner moving to an all-metal Volcano hotend.

    ≈ £34 / 36 €
    Check price on Amazon
  • QWORK hotend with a finned silver heatsink, brass nozzle, two plugged wires and a long white PTFE tube

    QWORK V5 J-head hotend for i3 Mega series 3D printers, 12 V 40 W

    A V5 J-head replacement hotend from QWORK for i3 Mega series 3D printers only, with an aluminium heater block stated to reach 250 °C, a 12 V 40 W heater, a 0.4 mm nozzle and a thermistor and heater cartridge fitted with plugs.

    Printer fit
    Only i3 Mega series 3D printers, title and second bullet
    Maximum temperature
    The aluminium heater block can reach 250 °C, first bullet
    Heat break
    V5 heater tube, fourth bullet; no material given
    Nozzle standard
    V5 J-head, 0.4 mm nozzle for 1.75 mm filament, title and fourth bullet
    Heater and thermistor
    12 V 40 W heater; thermistor and heater cartridge both supplied with plugs, fourth and fifth bullets
    Cooling
    Absent from the listing text — the product photograph shows a finned silver heatsink
    Melt zone
    Absent from the listing — a 45° chamfer at the rear and a flat, smooth nozzle section are described, third bullet
    Amazon reference
    B0B1WWMMYS (same reference on 5 Amazon marketplaces)
    EAN
    0795973834089
    • Thermistor and heater cartridge arrive with plugs, as the fifth bullet says
    • A temperature figure for the heater block: 250 °C
    • Only for the i3 Mega series

    Best for: An i3 Mega series owner replacing a worn V5 hotend with a plug-in part.

    ≈ 8 €
    Check price on Amazon
  • Redrex hotend parts: red finned heatsink, gold heater block, steel throat, brass nozzle, push-in fitting and two screws

    REDREX Hotend kit for CR-10 and Ender 3 series, without thermistor or heater

    A Redrex hotend kit for CR-10 and Ender 3 series 3D printers — hotend, nozzle, throat, heater block and a straight pneumatic fitting — with a throat not lined with PTFE and no thermistor or heater cartridge in the box.

    Printer fit
    CR-10, CR-10S, CR-10 S5, CR-10 Mini, CR-10 S4, Ender 3 and Ender 3S, first bullet; Ender 3 Pro, Ender 3 V2 and Ender 5 series added in the title
    Maximum temperature
    Absent from the listing
    Heat break
    Straight-through throat not lined with PTFE, second bullet
    Nozzle standard
    Nozzle included, fifth bullet; size and thread absent from the listing
    Heater and thermistor
    NOT included; a 12 V or 24 V heater cartridge can be fitted, third bullet
    Cooling
    Absent from the listing text — the product photograph shows a red finned heatsink
    Melt zone
    Absent from the listing — aluminium, stainless steel and brass named as materials, fourth bullet
    Amazon reference
    B07Q4P4LKC (same reference on 6 Amazon marketplaces)
    EAN
    0605175678957
    • A throat with no PTFE lining, which the listing links to fewer clogs
    • A choice of 12 V or 24 V heater cartridge
    • Thermistor and heater cartridge not included

    Best for: A CR-10 or Ender 3 owner who keeps their existing thermistor and heater and needs the metal parts.

    ≈ 9 €
    Check price on Amazon

All heat transfer vinyl