Skip to content

Printed, not cut

HERMA Inkjet iron-on transfer paper for light textiles, A4, 10 sheets

Ten A4 iron-on transfer sheets from HERMA for inkjet printers, for printing designs onto white and light textiles such as T-shirts, hoodies and cushion covers; a printable transfer paper rather than a vinyl for cutting, and not for laser printers or copiers.

HERMA T-Shirt Folie pack, A4 10 sheets, No. 4524, marked inkjet print and machine washable up to 40 °C

HERMA Inkjet iron-on transfer paper for light textiles, A4, 10 sheets

Ten A4 iron-on transfer sheets from HERMA for inkjet printers, for printing designs onto white and light textiles such as T-shirts, hoodies and cushion covers; a printable transfer paper rather than a vinyl for cutting, and not for laser printers or copiers.

Press temperature
Absent from the listing
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
White and light textiles: T-shirts, sweatshirts, hoodies, cushion covers, tote bags, second and fifth bullets
Finish
Absent from the listing — printable white transfer sheet, fifth bullet
Size
A4, 21 × 29.7 cm, 10 sheets, fifth bullet
Wash advice
Absent from the listing text — the pack in the product photograph reads machine washable up to 40 °C
Amazon reference
B0BS6THLRP (same reference on 6 Amazon marketplaces)
EAN
4008705045247
  • Designs are printed, so no cutting machine is needed
  • A clear printer limit: inkjet only
  • No temperature, time or peel detail; wash temperature only on the pack

Best for: Someone with an inkjet printer and an iron who wants a photo or full-colour design on a white T-shirt.

≈ £12 / 9 €
Check price on Amazon

Specifications

Press temperature
Absent from the listing
Press time and pressure
Absent from the listing
Peel
Absent from the listing
Compatible fabrics
White and light textiles: T-shirts, sweatshirts, hoodies, cushion covers, tote bags, second and fifth bullets
Finish
Absent from the listing — printable white transfer sheet, fifth bullet
Size
A4, 21 × 29.7 cm, 10 sheets, fifth bullet
Wash advice
Absent from the listing text — the pack in the product photograph reads machine washable up to 40 °C
Amazon reference
B0BS6THLRP (same reference on 6 Amazon marketplaces)
EAN
4008705045247

The HERMA transfer paper listing, bullet by bullet

Five bullets: transfer paper for sharp, bright prints; uses on T-shirts, sweatshirts, hoodies, cushion covers and tote bags; gift occasions; all inkjet printers, not laser printers or copiers; and 10 A4 sheets of 21 × 29.7 cm for white and light textiles.

HERMA is paper, not vinyl

The design is printed. Heat transfer vinyl is cut to shape on a plotter; HERMA’s sheet goes through an inkjet printer and carries the whole printed image. That allows photos and gradients, and it suits a light fabric for the colours to show.

What HERMA leaves out

No temperature, time, pressure, peel method or wash advice appears in the bullets. The pack in the product photograph adds one figure: machine washable up to 40 °C.

Availability

At the last look-up, the German Amazon store was asking roughly 9 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Asking prices on the French, Italian and Spanish Amazon stores ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so those offers are left out of the figures above.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More heat transfer vinyl

  • White vinyl roll unrolled in front of a person in a black T-shirt printed lucky

    KEWUZY PU heat transfer vinyl roll 30.5 cm × 5 m, white

    A white 30.5 cm × 5 m roll of polyurethane heat transfer vinyl from KEWUZY for common cutting plotters, applied with an iron or heat press, for cotton, polyester, rayon, viscose and cotton-polyester blends, with advice to wash garments inside out.

    Press temperature
    Absent from the listing — “high temperature” without a figure, third bullet
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    Most cotton, polyester, rayon, viscose and cotton-polyester blends, fourth bullet
    Finish
    Absent from the listing — white polyurethane, title and first bullet
    Size
    30.5 × 500 cm roll, title and fifth bullet
    Wash advice
    Turn the garment inside out to protect the design, third bullet
    Amazon reference
    B0BZCP93HB (same reference on 5 Amazon marketplaces)
    EAN
    0701631778084
    • Five metres on one roll
    • Fabrics named: cotton, polyester, rayon, viscose and blends
    • No press temperature, time or peel

    Best for: A plotter owner making a run of white designs on cotton or polyester garments.

    ≈ 11 €
    Check price on Amazon
  • Coloured vinyl sheets fanned in a circle, black and white among them

    NANAPLUMS Heat transfer vinyl sheets 30.5 × 25.4 cm, 30 sheets, 18 colours

    Thirty sheets of heat transfer vinyl from NANAPLUMS in 18 colours, 30.5 × 25.4 cm, with a transparent carrier that makes small lettering easier to weed, applied with an iron or heat press to cotton, polyester, viscose, rayon and blends, and best washed inside out.

    Press temperature
    Absent from the listing
    Press time and pressure
    Absent from the listing
    Peel
    Absent from the listing
    Compatible fabrics
    Cotton, polyester, viscose, rayon and cotton-poly blends, fifth bullet
    Finish
    18 colours with a transparent carrier, title and second bullet
    Size
    30 sheets of 30.5 × 25.4 cm, called A4 in the first bullet, title and first bullet
    Wash advice
    Washing inside out is better, fourth bullet
    Amazon reference
    B08T5Z3CQJ (same reference on 6 Amazon marketplaces)
    EAN
    6970834334852
    • A transparent carrier for weeding small text
    • Fabrics named, blends included
    • No temperature, time or peel

    Best for: A plotter owner cutting small, detailed lettering in several colours for garments.

    ≈ 18 €
    Check price on Amazon
  • UIOK heat transfer paper pack for light and white 30–100 % cotton fabrics, showing hand-drawn, laser and inkjet icons

    UIOK Printable iron-on transfer paper for light fabrics, 15 sheets, with 3 Teflon sheets

    Fifteen sheets of printable iron-on transfer paper from UIOK for inkjet or laser printers or drawing by hand, with three reusable Teflon sheets, pressed at 165–185 °C for 15–20 seconds under strong pressure onto white and light fabrics, with the first wash after 24 hours.

    Press temperature
    165–185 °C (329–365 °F), fourth bullet
    Press time and pressure
    15–20 seconds, strong pressure, fourth bullet
    Peel
    Peel the printed image from its backing, place it printed side up and cover with Teflon paper before pressing; no mirroring needed, fourth bullet
    Compatible fabrics
    White and light fabrics including nylon, canvas, lycra and polyester-cotton blends with 30–100 % cotton, second bullet
    Finish
    Absent from the listing — printable transfer paper for inkjet, laser or hand drawing, first bullet
    Size
    15 sheets of 8.5 × 11 in and 3 reusable Teflon sheets, second bullet; A4 in the title
    Wash advice
    First wash 24 hours after the transfer, third bullet
    Amazon reference
    B0C9M2D9JZ (same reference on 5 Amazon marketplaces)
    EAN
    0701213727660
    • Temperature, time and pressure all given
    • Inkjet, laser printer or hand drawing
    • A4 in the title, 8.5 × 11 in in the bullets

    Best for: Someone with a heat press and either printer type who wants full settings for a printed design on a light shirt.

    ≈ £16 / 17 €
    Check price on Amazon

Elsewhere on the workbench

  • Anycubic Vyper hotend with finned heatsink, heater block, brass nozzle, plugged cable and a white PTFE tube

    ANYCUBIC Vyper hotend, V5 J-head with Volcano nozzle, 24 V ceramic heater

    A replacement V5 J-head hotend with a Volcano nozzle and 24 V ceramic heater cartridge for the Anycubic Vyper, Kobra Max and Kobra Plus 3D printers, with plug-in thermistor and heater and a note on what to check if an NTC error appears.

    Printer fit
    Only Anycubic Vyper, Kobra Max and Kobra Plus; not Kobra Neo or Kobra Go, first bullet
    Maximum temperature
    Absent from the listing
    Heat break
    Absent from the listing — V5 J-head in the title
    Nozzle standard
    Volcano brass nozzle, title and second and fifth bullets; size absent from the listing
    Heater and thermistor
    24 V ceramic heater cartridge, title; thermistor and heater both supplied with a plug, third bullet
    Cooling
    Absent from the listing text — the product photograph shows a finned silver heatsink
    Melt zone
    Volcano design, said to heat the print head evenly, second bullet; no length given
    Amazon reference
    B09DKQ98L3 (same reference on 6 Amazon marketplaces)
    EAN
    0770490052598
    • The printers it does not fit are named: Kobra Neo and Kobra Go
    • Plug-in thermistor and heater, no wiring
    • No temperature figure

    Best for: An Anycubic Vyper, Kobra Max or Kobra Plus owner replacing the hotend with a plug-in part.

    ≈ 8 €
    Check price on Amazon
  • Black finned hotend with silver heater block, brass nozzle, red-sleeved heater wires and a blue braided thermistor lead

    BZ 3D Vyper all-metal hotend kit, 24 V 40 W, Volcano V5, bi-metal heat break, 0.4 mm

    An all-metal Volcano V5 J-head hotend kit from BZ 3D for Anycubic Vyper, Kobra Max and Kobra Plus 3D printers, with a titanium and copper bi-metal heat break, aluminium block, 0.4 mm brass nozzle, 24 V 40 W heater and an NTC100K B3950 thermistor rated to read up to 300 °C.

    Printer fit
    Anycubic Vyper, Kobra Max and Kobra Plus, title
    Maximum temperature
    Absent from the listing as a hotend rating — the thermistor reaches up to 300 °C in measurement, fifth bullet
    Heat break
    Bi-metal: titanium alloy to reduce upward heat conduction, copper for dissipation, second and fourth bullets
    Nozzle standard
    Volcano V5 J-head, brass nozzle 0.4 mm with a stated 0.01 mm tolerance, for 1.75 mm PLA, ABS, TPU and PA, title and first bullet
    Heater and thermistor
    24 V 40 W heater, title; NTC100K B3950 thermistor, 3 × 5.5 mm, about 100 mm total length, fifth bullet
    Cooling
    Absent from the listing text — the product photograph shows a black finned heatsink
    Melt zone
    Absent from the listing — Volcano V5 and aluminium heater block, title
    Amazon reference
    B0DFY9KSX6 (same reference on 6 Amazon marketplaces)
    EAN
    0747086755584
    • A titanium and copper heat break, with each metal’s role stated
    • Thermistor type and dimensions given
    • The 300 °C figure is the thermistor’s measuring limit

    Best for: An Anycubic Vyper, Kobra Max or Kobra Plus owner moving to an all-metal Volcano hotend.

    ≈ £34 / 36 €
    Check price on Amazon
  • QWORK hotend with a finned silver heatsink, brass nozzle, two plugged wires and a long white PTFE tube

    QWORK V5 J-head hotend for i3 Mega series 3D printers, 12 V 40 W

    A V5 J-head replacement hotend from QWORK for i3 Mega series 3D printers only, with an aluminium heater block stated to reach 250 °C, a 12 V 40 W heater, a 0.4 mm nozzle and a thermistor and heater cartridge fitted with plugs.

    Printer fit
    Only i3 Mega series 3D printers, title and second bullet
    Maximum temperature
    The aluminium heater block can reach 250 °C, first bullet
    Heat break
    V5 heater tube, fourth bullet; no material given
    Nozzle standard
    V5 J-head, 0.4 mm nozzle for 1.75 mm filament, title and fourth bullet
    Heater and thermistor
    12 V 40 W heater; thermistor and heater cartridge both supplied with plugs, fourth and fifth bullets
    Cooling
    Absent from the listing text — the product photograph shows a finned silver heatsink
    Melt zone
    Absent from the listing — a 45° chamfer at the rear and a flat, smooth nozzle section are described, third bullet
    Amazon reference
    B0B1WWMMYS (same reference on 5 Amazon marketplaces)
    EAN
    0795973834089
    • Thermistor and heater cartridge arrive with plugs, as the fifth bullet says
    • A temperature figure for the heater block: 250 °C
    • Only for the i3 Mega series

    Best for: An i3 Mega series owner replacing a worn V5 hotend with a plug-in part.

    ≈ 8 €
    Check price on Amazon

All heat transfer vinyl