Skip to content

A replacement part for one printer family

ECSiNG Bed levelling sensor for Anycubic Kobra 2 Max, Plus, Pro and Neo

A replacement bed levelling sensor from ECSiNG for Anycubic Kobra 2 Max, Plus, Pro and Neo 3D printers that already have automatic levelling, fitted with a standard connector and a mounting fixture.

Threaded cylindrical metal sensor with an orange face and a black cable ending in a three-pin plug

ECSiNG Bed levelling sensor for Anycubic Kobra 2 Max, Plus, Pro and Neo

A replacement bed levelling sensor from ECSiNG for Anycubic Kobra 2 Max, Plus, Pro and Neo 3D printers that already have automatic levelling, fitted with a standard connector and a mounting fixture.

Probe type
Absent from the listing text — a bed levelling sensor that detects bed unevenness, first and third bullets; the product photograph shows a threaded cylindrical sensor with an orange face
Repeatability
Absent from the listing
Bed compatibility
Anycubic Kobra 2 Max, Plus, Pro and Neo 3D printers with an automatic bed levelling sensor, second bullet
Mount
Mounting fixture, fifth bullet
Wiring and voltage
Standard connector, fifth bullet; no voltage given
Firmware support
Absent from the listing
Amazon reference
B0GN4QYKH8 (same reference on 6 Amazon marketplaces)
EAN
4894986036803
  • Named for four Kobra 2 models
  • A standard connector and mounting fixture
  • Sensor type not stated

Best for: An Anycubic Kobra 2 3D printer owner whose original levelling sensor has failed.

≈ 14 €
Check price on Amazon

Specifications

Probe type
Absent from the listing text — a bed levelling sensor that detects bed unevenness, first and third bullets; the product photograph shows a threaded cylindrical sensor with an orange face
Repeatability
Absent from the listing
Bed compatibility
Anycubic Kobra 2 Max, Plus, Pro and Neo 3D printers with an automatic bed levelling sensor, second bullet
Mount
Mounting fixture, fifth bullet
Wiring and voltage
Standard connector, fifth bullet; no voltage given
Firmware support
Absent from the listing
Amazon reference
B0GN4QYKH8 (same reference on 6 Amazon marketplaces)
EAN
4894986036803

The ECSiNG levelling sensor listing, bullet by bullet

Five bullets: one bed levelling sensor for first-layer accuracy; compatibility with Anycubic Kobra 2 Max, Plus, Pro and Neo 3D printers that have automatic bed levelling; detection of build plate unevenness to adjust nozzle height while printing; electronic parts in a robust housing; and a standard connector with a mounting fixture for installation with minimal tools.

ECSiNG as a replacement, not an upgrade

The printers named already level automatically. The second bullet limits compatibility to Kobra 2 models that have the sensor, which makes this a spare part for a failed original.

What ECSiNG leaves out

The listing does not say what kind of sensor it is, what voltage it runs on or how accurately it reads. The product photograph shows a threaded metal cylinder with an orange face and a cable ending in a three-pin plug, which is the only description of its form.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 14 € to 20 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More bed levelling probes

  • Probe printed 3D Touch with its cable, an extension lead, two screws, two nuts, connector housings and crimp terminals

    Aicharynic 3D Touch V3.2 automatic levelling probe for Ender 3, Ender 5 and Geeetech A-series

    A 3D Touch V3.2 touch probe from Aicharynic for automatic bed levelling on Ender 3, Ender 5 and Geeetech A10, A20 and A30 3D printers and glass, wood or metal beds, with a stated ± 0.005 mm accuracy deviation, an LED that flashes on a fault, and a firmware update to install.

    Probe type
    3D Touch V3.2 touch probe with a light probe pin, title and third bullet; sold as a BL-Touch accessory in the title
    Repeatability
    Absent from the listing as repeatability — an accuracy deviation of ± 0.005 mm is stated, first bullet
    Bed compatibility
    Glass, wood, metal and other beds, fifth bullet; Ender 3, 3S, 3 Pro, Ender 5, 5S, 5 Pro and Geeetech A10, A20 and A30 series named, title
    Mount
    Absent from the listing text — the product photograph shows two screws and two nuts
    Wiring and voltage
    Simple wiring, fourth bullet; no voltage given; the product photograph shows an extension lead, connector housings and a strip of crimp terminals
    Firmware support
    Firmware has to be updated from a computer before use, fourth bullet
    Amazon reference
    B0CYZYHL5C (same reference on 5 Amazon marketplaces)
    EAN
    0766683251893
    • A stated accuracy deviation: ± 0.005 mm
    • Glass, wood and metal beds named
    • A firmware update is needed before use

    Best for: An Ender 3 or Ender 5 owner adding a touch probe who is comfortable flashing printer firmware.

    ≈ 15 €
    Check price on Amazon
  • Black strain gauge plate with screw holes and a plugged four-wire cable, below a Creality package header

    Creality K2 series strain gauge levelling module for K2, K2 Pro and K2 Plus

    An official Creality strain gauge module for the automatic bed levelling of the K2, K2 Pro and K2 Plus 3D printers, using metal strain sensing and fitted plug and play, in a listing that gives no accuracy figure, voltage or firmware detail.

    Probe type
    Strain gauge with metal strain sensing, title and first and third bullets
    Repeatability
    Absent from the listing — “high-precision calibration” without a figure, third bullet
    Bed compatibility
    Creality K2, K2 Pro and K2 Plus 3D printers, title and first, second and fourth bullets
    Mount
    Absent from the listing text — the product photograph shows a flat black plate with screw holes
    Wiring and voltage
    Plug and play, fourth bullet; no voltage given; the product photograph shows a twisted cable ending in a plug
    Firmware support
    Absent from the listing
    Amazon reference
    B0FW3P2SGY (same reference on 6 Amazon marketplaces)
    EAN
    0198549095196
    • An official Creality part for the K2 series
    • Plug and play, as the fourth bullet says
    • No accuracy or repeatability figure

    Best for: A Creality K2, K2 Pro or K2 Plus 3D printer owner replacing the levelling sensor with the maker’s part.

    ≈ £9 / 10 €
    Check price on Amazon

Elsewhere on the workbench

  • SUNLU black PETG filament spool

    SUNLU PETG 1.75 mm, black, 1 kg, with print settings

    A 1 kg spool of black SUNLU PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing recommends a 220–230 °C nozzle, a 60–70 °C bed and speeds from 40 to 600 mm/s, in airtight vacuum packaging.

    Diameter tolerance
    ±0.02 mm, eighth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Nozzle 220–230 °C, bed 60–70 °C, print speed 40–600 mm/s, seventh bullet
    Adhesion guidance
    Absent from the listing as guidance — excellent layer adhesion is claimed, second bullet
    Moisture packaging
    Airtight vacuum packaging, ninth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B07TJDTJZD (same reference on 5 Amazon marketplaces)
    EAN
    0768894219198
    • Recommended nozzle, bed and speed settings published
    • A ±0.02 mm tolerance
    • No desiccant mentioned

    Best for: A first PETG spool, printed from the settings on the listing.

    ≈ £13 / 14 €
    Check price on Amazon
  • 3DHoJor matte PLA filament spool in peach pink

    3DHoJor Matte PLA 1.75 mm, peach pink, 1 kg

    A 1 kg spool of peach-pink matte PLA from 3DHoJor in 1.75 mm with a ±0.02 mm tolerance, mechanically wound and checked by hand, and dried for 24 hours before vacuum sealing with desiccant.

    Diameter and tolerance
    1.75 mm ±0.02 mm, fourth bullet
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Matte, described as hiding layer lines, first bullet; peach pink, title
    Winding
    Fully mechanical winding with strict manual checks, fourth bullet
    Packaging
    Dried for 24 hours, then vacuum-sealed with desiccant, fifth bullet
    Amazon reference
    B0CRZ3433T (same reference on 6 Amazon marketplaces)
    EAN
    0774882966258
    • Dried for 24 hours before sealing, as the fifth bullet states
    • A matte finish that the listing says hides layer lines
    • No temperatures or spool dimensions

    Best for: Decorative prints, figures and cosplay pieces where a non-glossy finish matters.

    ≈ £11 / 14 €
    Check price on Amazon
  • AzureFilm PLA Matte HS filament spool in bordeaux

    AzureFilm PLA Matte HS 1.75 mm, bordeaux, 1 kg, for fast printers

    A 1 kg spool of bordeaux AzureFilm PLA Matte HS in 1.75 mm with a ±0.02 mm tolerance, an ultra-matte finish and a reinforced formulation stated to extrude stably at up to 600 mm/s.

    Diameter and tolerance
    1.75 mm ±0.02 mm, fourth bullet
    Net weight
    1 kg, title and sixth bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Ultra-matte, non-glossy, first bullet; bordeaux, title
    Winding
    Absent from the listing
    Packaging
    Sealed spool, delivered moisture-protected, sixth bullet
    Amazon reference
    B0F9HC8ZGG (same reference on 6 Amazon marketplaces)
    EAN
    3830063546828
    • An ultra-matte finish combined with a high-speed formulation
    • Extrusion stated as stable at up to 600 mm/s
    • No temperatures, spool size or winding information

    Best for: Display models and cosplay parts printed quickly on a high-speed printer.

    ≈ 17 €
    Check price on Amazon

All bed levelling probes