Skip to content

Formulated for fast printers, named by model

eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

eSUN PLA Basic white filament spool

eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

Diameter and tolerance
1.75 mm ±0.03 mm, title
Net weight
1 kg, title
Spool size
Absent from the listing
Recommended temperatures
Absent from the listing
Finish
Absent from the listing — white, title
Winding
Absent from the listing
Packaging
Vacuum-sealed bag with desiccant, fifth bullet
Amazon reference
B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
EAN
6922572205635
  • Formulated for high-speed printing, with compatible printers named
  • Vacuum-sealed with a desiccant bag
  • A ±0.03 mm tolerance, looser than the ±0.02 mm of four other PLAs here

Best for: Fast CoreXY and high-speed bed-slinger printers, including the AnkerMake M5 reviewed on this site.

≈ £12 / 13 €
Check price on Amazon

Specifications

Diameter and tolerance
1.75 mm ±0.03 mm, title
Net weight
1 kg, title
Spool size
Absent from the listing
Recommended temperatures
Absent from the listing
Finish
Absent from the listing — white, title
Winding
Absent from the listing
Packaging
Vacuum-sealed bag with desiccant, fifth bullet
Amazon reference
B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
EAN
6922572205635

The eSUN PLA Basic listing, bullet by bullet

Five bullets: a PLA improved for flow and fast printing; compatibility with high-speed printers such as the AnkerMake M5, Bambu Lab X1 and P1P, K1 and K1 MAX, Flsun V400 and Raise3D Pro3 and RMF500; higher precision, no warping and less brittleness than ordinary PLA; balanced melting and cooling for smooth extrusion with less stringing; and a vacuum-sealed bag with desiccant.

A PLA for fast machines

Formulated to melt and cool quickly. High-speed printers push filament through faster than standard PLA may melt evenly. eSUN names the printers it has in mind, including the AnkerMake M5 reviewed on this site.

±0.03 mm on the eSUN title

The tolerance is published and slightly looser than the ±0.02 mm that four other PLAs here state.

Packaging against moisture

A vacuum bag with desiccant keeps PLA dry until opened. Once opened, storage is the owner’s job.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 13 € to 17 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

What this fits

More PLA filament

  • GEEETECH black PLA filament spool beside a black printed figure

    GEEETECH PLA 1.75 mm, black, 1 kg spool

    A spool of black GEEETECH PLA in 1.75 mm with a ±0.02 mm tolerance and a printing range of 190–220 °C, vacuum-packed, whose weight is given as 1 kg in the title and 1.1 kg in the first bullet.

    Diameter and tolerance
    1.75 mm ±0.02 mm, first and fourth bullets
    Net weight
    1 kg in the title; 1.1 kg spool in the first bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Printing temperature 190–220 °C, third bullet; no bed temperature
    Finish
    Absent from the listing — black, title
    Winding
    Absent from the listing
    Packaging
    Vacuum packaging, first bullet
    Amazon reference
    B071DM81ZK (same reference on 5 Amazon marketplaces)
    EAN
    0718399619665
    • A published printing temperature range, 190–220 °C
    • Vacuum packaging and a ±0.02 mm tolerance
    • Weight given as 1 kg in the title and 1.1 kg in the bullets

    Best for: A PLA user who wants a stated temperature range to start tuning from.

    ≈ 12 €
    Check price on Amazon
  • SUNLU PLA+ white filament spool

    SUNLU PLA+ 1.75 mm, white, 1 kg

    A 1 kg spool of white SUNLU PLA+ in 1.75 mm with a ±0.02 mm tolerance, on a spool whose diameter, width and hole size are all published, wound by machine and inspected by hand.

    Diameter and tolerance
    1.75 mm ±0.02 mm, third bullet
    Net weight
    1 kg, title
    Spool size
    Diameter 20.32 cm, width 6.35 cm, hole 5.59 cm, fourth bullet
    Recommended temperatures
    Absent from the listing
    Finish
    PLA+, white; described as stronger than normal PLA with brighter colours, first bullet
    Winding
    Fully mechanical winding with manual inspection, no overlaps, second and third bullets
    Packaging
    Absent from the listing
    Amazon reference
    B07XFL3XB9 (same reference on 5 Amazon marketplaces)
    EAN
    0747045295922
    • Spool diameter, width and hole size published, so holder fit can be checked
    • A ±0.02 mm diameter tolerance
    • No recommended print temperatures

    Best for: Everyday PLA printing on an FDM printer whose spool holder needs checked dimensions.

    ≈ 11 €
    Check price on Amazon
  • 3DHoJor matte PLA filament spool in peach pink

    3DHoJor Matte PLA 1.75 mm, peach pink, 1 kg

    A 1 kg spool of peach-pink matte PLA from 3DHoJor in 1.75 mm with a ±0.02 mm tolerance, mechanically wound and checked by hand, and dried for 24 hours before vacuum sealing with desiccant.

    Diameter and tolerance
    1.75 mm ±0.02 mm, fourth bullet
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Matte, described as hiding layer lines, first bullet; peach pink, title
    Winding
    Fully mechanical winding with strict manual checks, fourth bullet
    Packaging
    Dried for 24 hours, then vacuum-sealed with desiccant, fifth bullet
    Amazon reference
    B0CRZ3433T (same reference on 6 Amazon marketplaces)
    EAN
    0774882966258
    • Dried for 24 hours before sealing, as the fifth bullet states
    • A matte finish that the listing says hides layer lines
    • No temperatures or spool dimensions

    Best for: Decorative prints, figures and cosplay pieces where a non-glossy finish matters.

    ≈ £11 / 14 €
    Check price on Amazon

Elsewhere on the workbench

  • Eight Lya Vinyl mats fanned out — purple Strong, pink Fabric, five green Standard, blue Light — with a yellow scraper

    Lya Vinyl Cutting mats 12 × 12 in, 5 standard, 1 light, 1 strong, 1 fabric grip, with scraper

    Eight 12 × 12 in PVC cutting mats from Lya Vinyl for Cricut Explore Air and Maker cutting machines — five green standard grip, one blue light grip, one purple strong grip and one pink fabric grip — with a vinyl scraper and a protective film on each.

    Size and machine fit
    30.5 × 30.5 cm (12 × 12 in), for Cricut Explore Air series and Maker cutting machines, title and first bullet
    Grip level
    5 standard (green), 1 light (blue), 1 strong (purple), 1 fabric (pink), first and second bullets
    Material suitability
    Fabric grip for any fabric; standard for medium materials; light for light materials; strong for heavy materials, second bullet
    Grid markings
    Absent from the listing text — the product photograph shows inch grids
    Pack contents
    8 mats and 1 vinyl scraper, first bullet; the product photograph matches the colours and count
    Film
    Protective film on each mat, third and fourth bullets
    Care advice
    Keep the clear film on in storage; one set is stated to last a professional vinyl crafter 6 months, fourth bullet
    Amazon reference
    B0BCNYDB3R (same reference on 5 Amazon marketplaces)
    EAN
    0713424693726
    • Five standard grip mats, the grip the listing says gets used most
    • Four grips colour-coded
    • Only one each of light, strong and fabric grip

    Best for: A regular vinyl crafter on a Cricut Explore Air or Maker cutting machine who wears out standard mats fastest.

    ≈ 16 €
    Check price on Amazon
  • DUROZZLE bright nickel-plated nozzle engraved 0.4 with a red ruby tip

    DUROZZLE Ruby-tipped nozzle 0.4 mm for E3D V6, nickel-plated copper

    A 0.4 mm DUROZZLE nozzle with a real ruby tip in a nickel-plated copper alloy body for E3D V6 hotends, sold for carbon fibre, glass fibre and metal-filled filaments on Prusa i3 MK3S, MINI and Anycubic printers.

    Hotend standard
    E3D V6; Original Prusa i3 MK2 to MK3S and MINI, Anycubic i3 Mega, Mega X, Mega S, Kobra and Kobra Neo named, first bullet
    Orifice diameter
    0.4 mm, title
    Material
    Real ruby tip, third bullet; copper alloy body with nickel plating, title and second bullet
    Length
    Absent from the listing
    Abrasion resistance
    Ruby tip for highly abrasive carbon fibre, glass fibre and metal-filled filaments, third bullet
    Pack contents
    Absent from the listing as a count — the title names the nozzle in the singular
    Amazon reference
    B0FPXF7Q1R (same reference on 4 Amazon marketplaces)
    EAN
    0786443539153
    • A real ruby tip for abrasive filaments, in a copper alloy body
    • A funnel-shaped interior meant to avoid material collecting in dead corners
    • The dearest nozzle listing of the five

    Best for: A Prusa MK3S, MINI or other E3D V6 printer owner running carbon fibre or glass-filled filament.

    ≈ 25 €
    Check price on Amazon
  • Three blue RANCOVY LightGrip mats with grids marked to 12 in and 30 cm

    RANCOVY LightGrip cutting mats for Cricut Maker and Explore, 3 pack

    Three LightGrip self-adhesive cutting mats from RANCOVY with grid lines, for Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, holding office paper, printable fabric, light card, thin scrapbook paper, gift wrap and vinyl, in PVC with a protective film.

    Size and machine fit
    Size absent from the listing text — the grid in the product photograph runs to 12 in on both edges; Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, first bullet
    Grip level
    LightGrip, title and second bullet
    Material suitability
    Office paper, printable fabric, light card, thin scrapbook paper, gift wrap, Vinyl 651 and heat transfer vinyl, second bullet
    Grid markings
    Exact grid lines, first bullet
    Pack contents
    3 mats, title and first bullet
    Film
    Transparent protective film, fifth bullet
    Care advice
    Scrape off excess with a scraper, lift cuts with a spatula, keep the film on after use, fifth bullet
    Amazon reference
    B09TVP4X1X (same reference on 6 Amazon marketplaces)
    EAN
    0762102992095
    • Light grip for thin paper and printable fabric
    • Cricut cutting plotter models named one by one
    • Mat size readable only from the photographed grid

    Best for: A Cricut Maker or Explore cutting machine owner cutting thin paper who has confirmed the mat size elsewhere.

    ≈ £11 / 13 €
    Check price on Amazon

All PLA filament