Skip to content

Light grip only, no size given

RANCOVY LightGrip cutting mats for Cricut Maker and Explore, 3 pack

Three LightGrip self-adhesive cutting mats from RANCOVY with grid lines, for Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, holding office paper, printable fabric, light card, thin scrapbook paper, gift wrap and vinyl, in PVC with a protective film.

Three blue RANCOVY LightGrip mats with grids marked to 12 in and 30 cm

RANCOVY LightGrip cutting mats for Cricut Maker and Explore, 3 pack

Three LightGrip self-adhesive cutting mats from RANCOVY with grid lines, for Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, holding office paper, printable fabric, light card, thin scrapbook paper, gift wrap and vinyl, in PVC with a protective film.

Size and machine fit
Size absent from the listing text — the grid in the product photograph runs to 12 in on both edges; Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, first bullet
Grip level
LightGrip, title and second bullet
Material suitability
Office paper, printable fabric, light card, thin scrapbook paper, gift wrap, Vinyl 651 and heat transfer vinyl, second bullet
Grid markings
Exact grid lines, first bullet
Pack contents
3 mats, title and first bullet
Film
Transparent protective film, fifth bullet
Care advice
Scrape off excess with a scraper, lift cuts with a spatula, keep the film on after use, fifth bullet
Amazon reference
B09TVP4X1X (same reference on 6 Amazon marketplaces)
EAN
0762102992095
  • Light grip for thin paper and printable fabric
  • Cricut cutting plotter models named one by one
  • Mat size readable only from the photographed grid

Best for: A Cricut Maker or Explore cutting machine owner cutting thin paper who has confirmed the mat size elsewhere.

≈ £11 / 13 €
Check price on Amazon

Specifications

Size and machine fit
Size absent from the listing text — the grid in the product photograph runs to 12 in on both edges; Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, first bullet
Grip level
LightGrip, title and second bullet
Material suitability
Office paper, printable fabric, light card, thin scrapbook paper, gift wrap, Vinyl 651 and heat transfer vinyl, second bullet
Grid markings
Exact grid lines, first bullet
Pack contents
3 mats, title and first bullet
Film
Transparent protective film, fifth bullet
Care advice
Scrape off excess with a scraper, lift cuts with a spatula, keep the film on after use, fifth bullet
Amazon reference
B09TVP4X1X (same reference on 6 Amazon marketplaces)
EAN
0762102992095

The RANCOVY mat listing, bullet by bullet

Five bullets: self-adhesive mats with grid lines for Cricut Maker 4, 3 and Explore 5, 4, 3, Air 2, Air and One cutting machines; LightGrip for office paper, printable fabric, light card, scrapbook paper, gift wrap, Vinyl 651 and HTV; grip that holds without leaving adhesive on the cut; non-toxic, odourless PVC as the seller describes it; and care with a scraper, spatula and the protective film.

RANCOVY gives no size

Cricut cutting plotters named, but no dimensions. Maker and Explore cutting machines take 12 × 12 in and 12 × 24 in mats. Which one this is does not appear in the listing text; the grid on the mats in the product photograph runs to 12 in along both edges, which points to the square size.

RANCOVY’s light grip

Light grip lets thin paper come off without tearing. Heavier card or fabric needs a stronger mat, which this pack does not include.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 13 € to 16 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More plotter cutting mats

  • Three long gridded mats in green, blue and purple, the purple one printed with a grip colour key

    QWORK Cutting mats 30.5 × 61 cm, light, standard and strong grip, for Cricut Maker and Explore Air 2, 3 pack

    Three 30.5 × 61 cm cutting mats from QWORK in light, standard and strong grip, for Cricut Maker, Explore Air 2, Air and One cutting machines, with light grip for paper, standard for card and vinyl, and strong for thick card and bonded fabric.

    Size and machine fit
    30.5 × 61 cm, for Cricut Maker, Explore Air 2, Air and One cutting machines, title and first and second bullets
    Grip level
    Light grip, standard grip and strong grip, first bullet
    Material suitability
    Light grip: paper, board and light materials; standard: card, vinyl and medium materials; strong: thick card and reinforced fabric, third to fifth bullets
    Grid markings
    Absent from the listing text — the product photograph shows grids and a colour key: blue light, green standard, pink fabric, purple strong
    Pack contents
    3 mats, title and first bullet
    Film
    Absent from the listing
    Care advice
    Absent from the listing
    Amazon reference
    B0F6XG7S7K (same reference on 6 Amazon marketplaces)
    EAN
    0795973945013
    • The long 30.5 × 61 cm format
    • Each grip matched to materials
    • No grid, film or care advice

    Best for: A Cricut Maker or Explore Air 2 cutting machine owner cutting long banners or borders.

    ≈ 16 €
    Check price on Amazon
  • Five AIRCUT gridded mats fanned out in purple, blue, pink and two greens, labels reading StrongGrip, LightGrip and FabricGrip

    AIRCUT Cutting mats 12 × 12 in, light, standard, strong and fabric grip, for Cricut cutting plotters, 5 pack

    Five 12 × 12 in PVC cutting mats from AIRCUT in four grip levels — light, standard, strong and fabric — for Cricut Explore 5, One, Air, Air 2, 3 and 4 and Maker, Maker 3 and Maker 4 cutting machines, with a clear film to keep on in storage.

    Size and machine fit
    12 × 12 in, for Cricut Explore 5, One, Air, Air 2, 3, 4, Maker, Maker 3 and Maker 4 cutting machines, first bullet
    Grip level
    Light, standard, strong and fabric grip across 5 mats, first bullet; split not given
    Material suitability
    Card, construction paper, printable fabric and iron-on, pearl paper, printer paper, parchment, vinyl, washi sheets, window film, fourth bullet
    Grid markings
    Absent from the listing text — the product photograph shows inch grids
    Pack contents
    5 mats of 12 × 12 in, first bullet; in the product photograph the front green mat is labelled StrongGrip and no StandardGrip label is legible
    Film
    Clear film, fifth bullet
    Care advice
    Keep the clear film on in storage to keep off paper scraps and dust, fifth bullet
    Amazon reference
    B0C6JTP73L (same reference on 6 Amazon marketplaces)
    EAN
    0762102992545
    • Four grip levels including fabric grip
    • Five mats
    • Which grip comes twice is not said

    Best for: A Cricut Maker cutting machine owner who cuts fabric as well as paper and vinyl.

    ≈ $14 / £13 / 17 €
    Check price on Amazon
  • Three white mats labelled Standard Adhesive with black inch grids and a note for Silhouette Cameo 3 and other cutters

    LCOUACEO Standard grip cutting mats 12 × 12 in for Silhouette Cameo 1–4, 3 pack

    Three standard grip PVC cutting mats from LCOUACEO, 12 × 12 in with an overall size of 34.5 × 32.5 cm and translucent black grid lines, for Silhouette Cameo 1, 2, 3 and 4 cutting machines, with a light adhesive in the grid area and a protective film.

    Size and machine fit
    12 × 12 in cutting area, 34.5 × 32.5 cm overall, for Silhouette Cameo 1, 2, 3 and 4 and other digital cutting machines, title and second and fourth bullets
    Grip level
    Standard grip, light adhesive in the grid area, title and first and second bullets
    Material suitability
    Stickers, embossed and light card, card, patterned paper, iron-on and vinyl, fifth bullet
    Grid markings
    Translucent black measuring lines, third bullet
    Pack contents
    3 cutting mats, fifth bullet
    Film
    Protective film to remove before use and replace after, fourth bullet
    Care advice
    Put the film back after use to keep dust off the adhesive, fourth bullet
    Amazon reference
    B0BR28FKHG (same reference on 5 Amazon marketplaces)
    EAN
    0754008156312
    • Overall size given: 34.5 × 32.5 cm
    • Black grid lines for measuring
    • Standard grip only

    Best for: A Silhouette Cameo 3 or 4 cutting machine owner who wants spare standard mats with clear grid lines.

    ≈ 13 €
    Check price on Amazon

Elsewhere on the workbench

  • Two IR Transmitter boards with clear LEDs and two IR Receiver boards, each marked DAT, VCC and GND

    iHaospace 38 kHz IR receiver and IR transmitter module kit, 2 sets

    Two sets of 38 kHz infrared receiver and transmitter modules from iHaospace, each with a signal LED and a three-pin Out, Vcc and GND header, for infrared communication and remote control on Arduino, 51, AVR and ARM platforms.

    Itemised modules
    2 sets of 38 kHz IR receiver and IR transmitter modules, title
    Logic voltage
    Absent from the listing
    Interface
    Digital; pins (1) Out, (2) Vcc, (3) GND, fifth bullet; transmitter driven by a single transistor, modulated by the program, second bullet
    Labelling
    Absent from the listing text — signal LED on the module, fourth bullet; the product photograph shows boards printed IR Transmitter and IR Receiver with pins marked DAT, VCC and GND
    Documentation and example code
    Absent from the listing
    Storage
    Absent from the listing
    Amazon reference
    B0893BD1V6 (same reference on 5 Amazon marketplaces)
    EAN
    6431773966066
    • A pinout given: Out, Vcc, GND
    • Signal LED for checking
    • No voltage

    Best for: A maker building infrared remote control into an Arduino project who can write the modulation code.

    ≈ 8 €
    Check price on Amazon
  • KEYESTUDIO 37 in 1 kit box, micro:bit shield, battery holder, micro servo, jumper wires, USB cable, LCD, ultrasonic sensor and rows of modules

    KEYESTUDIO micro:bit starter kit with sensor shield and 37 sensor modules, micro:bit not included

    A starter kit from KEYESTUDIO for the BBC micro:bit V1 and V2 with a sensor shield and 37 sensor modules — from digital LED and analog temperature to photocell and ultrasonic — each packed separately in a compartment box, with an online tutorial; the micro:bit itself is not included.

    Itemised modules
    37 kinds of sensor module, including digital LED, analog temperature, photocell and ultrasonic modules, plus a KEYESTUDIO sensor shield, first and second bullets
    Logic voltage
    Absent from the listing
    Interface
    Sensor shield fully compatible with micro:bit V1 and V2, first bullet
    Labelling
    Boards packed by function and voltage, fifth bullet
    Documentation and example code
    Online tutorial with introduction, wiring diagrams, code, driver installation and example projects, third bullet
    Storage
    Each sensor bagged separately in a plastic box with compartments, fourth bullet
    Amazon reference
    B07GSVHWNS (same reference on 6 Amazon marketplaces)
    EAN
    0606184533886
    • Thirty-seven modules and a shield
    • Each module bagged in a compartment box
    • micro:bit not included

    Best for: A micro:bit owner, school or family who wants many sensors organised for lessons.

    ≈ $50 / £50 / 53 €
    Check price on Amazon
  • AIYHSW reel labelled Sn99.3 Cu0.7, flux 2.0 %, lead-free, WT 20 g, DIA 0.8 mm

    AIYHSW Lead-free solder wire Sn99.3 Cu0.7, 0.8 mm, 20 g, rosin core

    A 20 g reel of lead-free solder wire from AIYHSW in Sn99.3 Cu0.7, 0.8 mm thick, with a no-clean rosin core and a stated melting point of 227 °C, for cable, circuit board and small electronics repair.

    Alloy
    Sn99.3 Cu0.7, lead-free, title and first bullet
    Melting point
    227 °C, third bullet
    Diameter
    0.8 mm, title and first bullet
    Flux type and percentage
    Rosin core, no-clean formula, second bullet; the reel label in the product photograph reads FLUX 2.0 %
    Net weight
    20 g, title and first bullet
    Handling guidance
    Absent from the listing — “no toxic gas” and “no odour” are the seller’s wording, fourth bullet
    Amazon reference
    B0H6FHB7MX (same reference on 6 Amazon marketplaces)
    EAN
    0714047028612
    • Alloy, diameter and melting point all given
    • No-clean rosin core
    • Flux percentage only on the reel label

    Best for: An occasional repairer who needs a small reel of lead-free solder for cables and boards.

    ≈ 5 €
    Check price on Amazon

All plotter cutting mats