Skip to content

Each module in its own bag

KEYESTUDIO micro:bit starter kit with sensor shield and 37 sensor modules, micro:bit not included

A starter kit from KEYESTUDIO for the BBC micro:bit V1 and V2 with a sensor shield and 37 sensor modules — from digital LED and analog temperature to photocell and ultrasonic — each packed separately in a compartment box, with an online tutorial; the micro:bit itself is not included.

KEYESTUDIO 37 in 1 kit box, micro:bit shield, battery holder, micro servo, jumper wires, USB cable, LCD, ultrasonic sensor and rows of modules

KEYESTUDIO micro:bit starter kit with sensor shield and 37 sensor modules, micro:bit not included

A starter kit from KEYESTUDIO for the BBC micro:bit V1 and V2 with a sensor shield and 37 sensor modules — from digital LED and analog temperature to photocell and ultrasonic — each packed separately in a compartment box, with an online tutorial; the micro:bit itself is not included.

Itemised modules
37 kinds of sensor module, including digital LED, analog temperature, photocell and ultrasonic modules, plus a KEYESTUDIO sensor shield, first and second bullets
Logic voltage
Absent from the listing
Interface
Sensor shield fully compatible with micro:bit V1 and V2, first bullet
Labelling
Boards packed by function and voltage, fifth bullet
Documentation and example code
Online tutorial with introduction, wiring diagrams, code, driver installation and example projects, third bullet
Storage
Each sensor bagged separately in a plastic box with compartments, fourth bullet
Amazon reference
B07GSVHWNS (same reference on 6 Amazon marketplaces)
EAN
0606184533886
  • Thirty-seven modules and a shield
  • Each module bagged in a compartment box
  • micro:bit not included

Best for: A micro:bit owner, school or family who wants many sensors organised for lessons.

≈ $50 / £50 / 53 €
Check price on Amazon

Specifications

Itemised modules
37 kinds of sensor module, including digital LED, analog temperature, photocell and ultrasonic modules, plus a KEYESTUDIO sensor shield, first and second bullets
Logic voltage
Absent from the listing
Interface
Sensor shield fully compatible with micro:bit V1 and V2, first bullet
Labelling
Boards packed by function and voltage, fifth bullet
Documentation and example code
Online tutorial with introduction, wiring diagrams, code, driver installation and example projects, third bullet
Storage
Each sensor bagged separately in a plastic box with compartments, fourth bullet
Amazon reference
B07GSVHWNS (same reference on 6 Amazon marketplaces)
EAN
0606184533886

The KEYESTUDIO micro:bit kit listing, bullet by bullet

Five bullets: a kit for micro:bit V1 and V2, micro:bit excluded, with a sensor shield and 37 sensor modules; modules such as a digital LED, analog temperature sensor, photocell and ultrasonic module for projects from traffic lights to alcohol detection; an online tutorial with introduction, wiring diagrams, code, driver installation and projects; each sensor bagged in a compartment box; and tidy soldering, packing by function and voltage, and FCC and CE marks.

KEYESTUDIO’s organisation

Thirty-seven bags in a compartment box. With this many modules, storage is part of the kit. The fourth and fifth bullets describe how they are sorted.

KEYESTUDIO and the micro:bit

The shield connects the modules to a micro:bit, which is sold separately. No micro:bit is reviewed on this site. The product photograph shows extras the bullets do not list: a battery holder, a micro servo, jumper wires, a USB cable and an LCD.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 53 € to 62 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More sensor kits

  • Adeept modules laid out — buttons, buzzers, LEDs, joystick, ultrasonic, gas and soil sensors — with an LCD, a GPIO extension board, ribbon cable, breadboard and jumper wires

    Adeept 24-module sensor starter kit for Raspberry Pi 4/3/2 B/B+, 95-page PDF, Python and C

    A starter kit of 24 sensors and modules from Adeept for Raspberry Pi 4, 3 and 2 B/B+ single-board computers, with a PDF manual of about 95 pages in 23 lessons, example code in Python and C, free technical support and a project box; the Raspberry Pi itself is not included.

    Itemised modules
    Absent from the listing text — 24 sensors and modules, title and first bullet; the product photograph shows labelled modules such as a joystick, ultrasonic sensor, MQ-2 gas sensor, soil sensor, LCD, GPIO extension board, breadboard and ribbon cable
    Logic voltage
    Absent from the listing
    Interface
    Absent from the listing
    Labelling
    Absent from the listing
    Documentation and example code
    PDF manual of about 95 pages with 23 lessons, code in Python and C, second bullet; free technical support, third bullet
    Storage
    Project box, fourth bullet
    Amazon reference
    B086HL88XR (same reference on 5 Amazon marketplaces)
    EAN
    0789371035759
    • A manual of about 95 pages in 23 lessons
    • Example code in Python and C
    • Modules not itemised

    Best for: A Raspberry Pi 4 single-board computer owner learning sensors in Python or C lesson by lesson.

    ≈ £37 / 43 €
    Check price on Amazon
  • Arduino Sensor Kit box with a Seeed logo, a base board carrying modules and a display, and six four-pin cables

    Arduino Sensor Kit – Base, over 10 sensors, with tutorials

    Arduino’s official Sensor Kit – Base, TPX00031, for beginners and teachers, with over 10 sensors covering temperature, light, motion, humidity and air quality, and access to tutorials and example projects.

    Itemised modules
    Absent from the listing — over 10 sensors, including temperature, light, motion, humidity and air quality, first and third bullets
    Logic voltage
    Absent from the listing
    Interface
    Absent from the listing text — the product photograph shows modules on a single base board and six four-pin cables
    Labelling
    Absent from the listing
    Documentation and example code
    Tutorials and example projects covering wiring and programming of each sensor, fourth bullet
    Storage
    Absent from the listing text — the product photograph shows a clear plastic case
    Amazon reference
    B08W9X7C3H (same reference on 6 Amazon marketplaces)
    EAN
    7630049202979
    • Official Arduino kit
    • Tutorials and example projects
    • Sensors not itemised

    Best for: A teacher or beginner who wants Arduino’s own tutorials matched to the sensors.

    ≈ $34 / £31 / 36 €
    Check price on Amazon
  • Two IR Transmitter boards with clear LEDs and two IR Receiver boards, each marked DAT, VCC and GND

    iHaospace 38 kHz IR receiver and IR transmitter module kit, 2 sets

    Two sets of 38 kHz infrared receiver and transmitter modules from iHaospace, each with a signal LED and a three-pin Out, Vcc and GND header, for infrared communication and remote control on Arduino, 51, AVR and ARM platforms.

    Itemised modules
    2 sets of 38 kHz IR receiver and IR transmitter modules, title
    Logic voltage
    Absent from the listing
    Interface
    Digital; pins (1) Out, (2) Vcc, (3) GND, fifth bullet; transmitter driven by a single transistor, modulated by the program, second bullet
    Labelling
    Absent from the listing text — signal LED on the module, fourth bullet; the product photograph shows boards printed IR Transmitter and IR Receiver with pins marked DAT, VCC and GND
    Documentation and example code
    Absent from the listing
    Storage
    Absent from the listing
    Amazon reference
    B0893BD1V6 (same reference on 5 Amazon marketplaces)
    EAN
    6431773966066
    • A pinout given: Out, Vcc, GND
    • Signal LED for checking
    • No voltage

    Best for: A maker building infrared remote control into an Arduino project who can write the modulation code.

    ≈ 8 €
    Check price on Amazon

Elsewhere on the workbench

  • Blue WUHANDAT reel labelled WT 50 g, flux 2.0 %, Sn99.3 Cu0.7, 1.0 mm ticked

    WUHANDAT Lead-free solder wire Sn99.3 Cu0.7, 1.0 mm, 2 % rosin flux, 30 g net

    A reel of lead-free Sn99.3 Cu0.7 solder wire from WUHANDAT, 1.0 mm with a 2 % rosin-core flux and a melting point of 227 °C, carrying 30 g of solder on a 50 g gross reel.

    Alloy
    Sn99.3 Cu0.7, lead-free, title and second bullet
    Melting point
    227 °C, fourth bullet
    Diameter
    1.0 mm, title and first bullet
    Flux type and percentage
    2 % rosin-core flux, second bullet
    Net weight
    30 g net, 50 g gross, first bullet; 50 g in the title
    Handling guidance
    Absent from the listing
    Amazon reference
    B0H14YWVQP (same reference on 4 Amazon marketplaces)
    EAN
    0761578230816
    • Flux share stated: 2 % rosin core
    • A 1.0 mm wire for general joints
    • 50 g in the title is gross; 30 g is solder

    Best for: A maker soldering wires and through-hole parts who wants a thicker lead-free wire.

    ≈ 9 €
    Check price on Amazon
  • Unbranded green reel labelled lead free solder wire, WT 100 g, flux 2.0 %, 1.0 mm ticked

    Ka wah core Lead-free silver solder wire Sn99 Ag0.3 Cu0.7, 1.0 mm, 2 % flux, 100 g

    A 100 g reel of lead-free solder wire from Ka wah core in Sn99 Ag0.3 Cu0.7 with a 2.0 % rosin-core flux, 1.0 mm thick and a stated melting point of 217 °C, for ICs, circuit boards and hobby soldering.

    Alloy
    Sn99 Ag0.3 Cu0.7, lead-free, first bullet
    Melting point
    217 °C (422.6 °F), second bullet
    Diameter
    1.0 mm (0.039 in), title and second bullet
    Flux type and percentage
    Rosin core, 2.0 %, first bullet
    Net weight
    Absent from the listing — 100 g gross, second bullet
    Handling guidance
    Absent from the listing — lead-free wire is called safer than leaded, fourth bullet
    Amazon reference
    B0BX9G3WDQ (same reference on 5 Amazon marketplaces)
    EAN
    0732214071186
    • A silver-bearing alloy at a stated 217 °C
    • Flux share stated: 2.0 %
    • Weight given as gross only

    Best for: A hobbyist who solders regularly and wants a silver-bearing lead-free wire in a larger reel.

    ≈ 16 €
    Check price on Amazon
  • Open BOJACK tin of amber paste labelled Soldering Flux Paste, Advanced Quality ZJ-18, Nw 50 g

    BOJACK No-clean lead-free flux paste, 50 g, pH 7 ± 0.3

    A 50 g pack of flux paste from BOJACK, no-clean and lead-free according to the title, with a stated neutral pH of 7 ± 0.3, for soldering electronic components, instruments and metals and for PCB, SMD and SMT repair.

    Form
    Paste, title and first bullet
    Chemistry
    Absent from the listing — lead-free, title
    Residue and cleaning
    No-clean, title
    Activity level
    Absent from the listing — neutral pH 7 ± 0.3; “no corrosion” stated, second and fourth bullets
    Volume
    50 g (1.8 oz), title and second bullet
    Dispensing
    Absent from the listing text — the product photograph shows a screw-top metal tin
    Handling guidance
    Absent from the listing — “non-toxic” is the seller’s wording, fourth bullet
    Amazon reference
    B09P4LJG36 (same reference on 5 Amazon marketplaces)
    EAN
    0762917045382
    • A pH figure: 7 ± 0.3
    • No-clean and lead-free, as the title says
    • Flux chemistry not named

    Best for: A hobbyist soldering boards who wants a no-clean paste in a medium quantity.

    ≈ £7 / 8 €
    Check price on Amazon

All sensor kits