Skip to content

The official kit, the modules unnamed

Arduino Sensor Kit – Base, over 10 sensors, with tutorials

Arduino’s official Sensor Kit – Base, TPX00031, for beginners and teachers, with over 10 sensors covering temperature, light, motion, humidity and air quality, and access to tutorials and example projects.

Arduino Sensor Kit box with a Seeed logo, a base board carrying modules and a display, and six four-pin cables

Arduino Sensor Kit – Base, over 10 sensors, with tutorials

Arduino’s official Sensor Kit – Base, TPX00031, for beginners and teachers, with over 10 sensors covering temperature, light, motion, humidity and air quality, and access to tutorials and example projects.

Itemised modules
Absent from the listing — over 10 sensors, including temperature, light, motion, humidity and air quality, first and third bullets
Logic voltage
Absent from the listing
Interface
Absent from the listing text — the product photograph shows modules on a single base board and six four-pin cables
Labelling
Absent from the listing
Documentation and example code
Tutorials and example projects covering wiring and programming of each sensor, fourth bullet
Storage
Absent from the listing text — the product photograph shows a clear plastic case
Amazon reference
B08W9X7C3H (same reference on 6 Amazon marketplaces)
EAN
7630049202979
  • Official Arduino kit
  • Tutorials and example projects
  • Sensors not itemised

Best for: A teacher or beginner who wants Arduino’s own tutorials matched to the sensors.

≈ $34 / £31 / 36 €
Check price on Amazon

Specifications

Itemised modules
Absent from the listing — over 10 sensors, including temperature, light, motion, humidity and air quality, first and third bullets
Logic voltage
Absent from the listing
Interface
Absent from the listing text — the product photograph shows modules on a single base board and six four-pin cables
Labelling
Absent from the listing
Documentation and example code
Tutorials and example projects covering wiring and programming of each sensor, fourth bullet
Storage
Absent from the listing text — the product photograph shows a clear plastic case
Amazon reference
B08W9X7C3H (same reference on 6 Amazon marketplaces)
EAN
7630049202979

The Arduino Sensor Kit listing, bullet by bullet

Five bullets: over 10 sensors, including temperature, light, motion and humidity; a design for beginners, teachers and students; coverage from environmental monitoring to motion and light detection; access to tutorials and example projects; and ideas from weather stations to motion alarms.

Arduino does not list its modules

“Over 10.” For an official kit the listing is vague: five sensor types named, no count, no module list. The tutorials are the real content on offer.

Arduino and its boards

No board is named as included or required. The Arduino UNO R4 WiFi microcontroller board reviewed on this site is not mentioned in this listing. The product photograph shows the modules mounted on one base board with four-pin cables, and a Seeed logo on the box.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 36 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More sensor kits

  • Two IR Transmitter boards with clear LEDs and two IR Receiver boards, each marked DAT, VCC and GND

    iHaospace 38 kHz IR receiver and IR transmitter module kit, 2 sets

    Two sets of 38 kHz infrared receiver and transmitter modules from iHaospace, each with a signal LED and a three-pin Out, Vcc and GND header, for infrared communication and remote control on Arduino, 51, AVR and ARM platforms.

    Itemised modules
    2 sets of 38 kHz IR receiver and IR transmitter modules, title
    Logic voltage
    Absent from the listing
    Interface
    Digital; pins (1) Out, (2) Vcc, (3) GND, fifth bullet; transmitter driven by a single transistor, modulated by the program, second bullet
    Labelling
    Absent from the listing text — signal LED on the module, fourth bullet; the product photograph shows boards printed IR Transmitter and IR Receiver with pins marked DAT, VCC and GND
    Documentation and example code
    Absent from the listing
    Storage
    Absent from the listing
    Amazon reference
    B0893BD1V6 (same reference on 5 Amazon marketplaces)
    EAN
    6431773966066
    • A pinout given: Out, Vcc, GND
    • Signal LED for checking
    • No voltage

    Best for: A maker building infrared remote control into an Arduino project who can write the modulation code.

    ≈ 8 €
    Check price on Amazon
  • KEYESTUDIO 37 in 1 kit box, micro:bit shield, battery holder, micro servo, jumper wires, USB cable, LCD, ultrasonic sensor and rows of modules

    KEYESTUDIO micro:bit starter kit with sensor shield and 37 sensor modules, micro:bit not included

    A starter kit from KEYESTUDIO for the BBC micro:bit V1 and V2 with a sensor shield and 37 sensor modules — from digital LED and analog temperature to photocell and ultrasonic — each packed separately in a compartment box, with an online tutorial; the micro:bit itself is not included.

    Itemised modules
    37 kinds of sensor module, including digital LED, analog temperature, photocell and ultrasonic modules, plus a KEYESTUDIO sensor shield, first and second bullets
    Logic voltage
    Absent from the listing
    Interface
    Sensor shield fully compatible with micro:bit V1 and V2, first bullet
    Labelling
    Boards packed by function and voltage, fifth bullet
    Documentation and example code
    Online tutorial with introduction, wiring diagrams, code, driver installation and example projects, third bullet
    Storage
    Each sensor bagged separately in a plastic box with compartments, fourth bullet
    Amazon reference
    B07GSVHWNS (same reference on 6 Amazon marketplaces)
    EAN
    0606184533886
    • Thirty-seven modules and a shield
    • Each module bagged in a compartment box
    • micro:bit not included

    Best for: A micro:bit owner, school or family who wants many sensors organised for lessons.

    ≈ $50 / £50 / 53 €
    Check price on Amazon
  • Adeept modules laid out — buttons, buzzers, LEDs, joystick, ultrasonic, gas and soil sensors — with an LCD, a GPIO extension board, ribbon cable, breadboard and jumper wires

    Adeept 24-module sensor starter kit for Raspberry Pi 4/3/2 B/B+, 95-page PDF, Python and C

    A starter kit of 24 sensors and modules from Adeept for Raspberry Pi 4, 3 and 2 B/B+ single-board computers, with a PDF manual of about 95 pages in 23 lessons, example code in Python and C, free technical support and a project box; the Raspberry Pi itself is not included.

    Itemised modules
    Absent from the listing text — 24 sensors and modules, title and first bullet; the product photograph shows labelled modules such as a joystick, ultrasonic sensor, MQ-2 gas sensor, soil sensor, LCD, GPIO extension board, breadboard and ribbon cable
    Logic voltage
    Absent from the listing
    Interface
    Absent from the listing
    Labelling
    Absent from the listing
    Documentation and example code
    PDF manual of about 95 pages with 23 lessons, code in Python and C, second bullet; free technical support, third bullet
    Storage
    Project box, fourth bullet
    Amazon reference
    B086HL88XR (same reference on 5 Amazon marketplaces)
    EAN
    0789371035759
    • A manual of about 95 pages in 23 lessons
    • Example code in Python and C
    • Modules not itemised

    Best for: A Raspberry Pi 4 single-board computer owner learning sensors in Python or C lesson by lesson.

    ≈ £37 / 43 €
    Check price on Amazon

Elsewhere on the workbench

  • Green CHANXUAN reel labelled lead-free, WT 30 g, flux 2.0 %, 0.6 mm ticked

    CHANXUAN Lead-free solder wire Sn99.3 Cu0.7, 0.6 mm, 2 % rosin flux, 20 g net

    A reel of lead-free Sn99.3 Cu0.7 solder wire from CHANXUAN, 0.6 mm with 2 % rosin flux and a melting point of about 227 °C, for a working temperature of 380 ± 20 °C, with 20 g of solder on a 30 g gross reel.

    Alloy
    Sn99.3 Cu0.7, lead-free, title and first bullet
    Melting point
    About 227 °C, third bullet
    Diameter
    0.6 mm, title and fifth bullet
    Flux type and percentage
    2 % rosin flux, low-residue formula needing no cleaning, first and fourth bullets
    Net weight
    20 g net, 30 g gross, fifth bullet; 30 g in the title
    Handling guidance
    Absent from the listing — a working temperature of 380 ± 20 °C is given, third bullet
    Amazon reference
    B0GZ2MHTH5 (same reference on 5 Amazon marketplaces)
    EAN
    0761578230731
    • A working temperature given: 380 ± 20 °C
    • Flux share stated: 2 % rosin
    • 30 g in the title is the gross weight; 20 g is solder

    Best for: A maker soldering small pads and SMD leads who wants a fine wire and an iron setting to start from.

    ≈ 6 €
    Check price on Amazon
  • goobay 40845 reel labelled 250 g, 0.3 % silver, lead-free, 1.0 mm

    goobay Lead-free silver solder wire Ag0.3 Cu0.7, 1 mm, 2.5 % no-clean flux, 250 g

    A 250 g reel of lead-free silver solder wire from goobay, 1 mm, with 0.3 % silver, 0.7 % copper, 96.5 % tin and 2.5 % halogen-free no-clean flux, a melting point of 217 °C and low smoke stated, for cables, boards and appliance repairs.

    Alloy
    96.5 % tin, 0.3 % silver, 0.7 % copper, lead-free, title and first bullet
    Melting point
    217 °C, title and first bullet
    Diameter
    1 mm, title and first bullet
    Flux type and percentage
    2.5 % no-clean flux, halogen-free, first and second bullets
    Net weight
    250 g reel, title and first bullet
    Handling guidance
    Absent from the listing — low smoke during soldering stated, third bullet
    Amazon reference
    B07RWKLB92 (same reference on 5 Amazon marketplaces)
    EAN
    4040849408458
    • A 250 g reel
    • No-clean, halogen-free flux at 2.5 %
    • No handling guidance beyond low smoke

    Best for: A regular solderer or small repair bench that goes through lead-free wire steadily.

    ≈ £37 / 32 €
    Check price on Amazon
  • Blue WUHANDAT reel labelled WT 50 g, flux 2.0 %, Sn99.3 Cu0.7, 1.0 mm ticked

    WUHANDAT Lead-free solder wire Sn99.3 Cu0.7, 1.0 mm, 2 % rosin flux, 30 g net

    A reel of lead-free Sn99.3 Cu0.7 solder wire from WUHANDAT, 1.0 mm with a 2 % rosin-core flux and a melting point of 227 °C, carrying 30 g of solder on a 50 g gross reel.

    Alloy
    Sn99.3 Cu0.7, lead-free, title and second bullet
    Melting point
    227 °C, fourth bullet
    Diameter
    1.0 mm, title and first bullet
    Flux type and percentage
    2 % rosin-core flux, second bullet
    Net weight
    30 g net, 50 g gross, first bullet; 50 g in the title
    Handling guidance
    Absent from the listing
    Amazon reference
    B0H14YWVQP (same reference on 4 Amazon marketplaces)
    EAN
    0761578230816
    • Flux share stated: 2 % rosin core
    • A 1.0 mm wire for general joints
    • 50 g in the title is gross; 30 g is solder

    Best for: A maker soldering wires and through-hole parts who wants a thicker lead-free wire.

    ≈ 9 €
    Check price on Amazon

All sensor kits