Skip to content

Flux and braid together

VACUBXBY NC-559-ASM no-clean flux paste 10 ml syringe with desoldering braid 2.5 mm

A set from VACUBXBY with 10 ml of NC-559-ASM no-clean rosin flux paste in a push-in syringe with three needles, lead-free, halogen-free and non-corrosive, and a 2.5 mm oxygen-free copper desoldering braid for SMD, BGA and board rework.

NC-559-ASM 10 ml flux syringe marked no halogen, a plunger, a 5 ml syringe, three needles and a solder wick reel marked 2.5 mm × 3.0 m

VACUBXBY NC-559-ASM no-clean flux paste 10 ml syringe with desoldering braid 2.5 mm

A set from VACUBXBY with 10 ml of NC-559-ASM no-clean rosin flux paste in a push-in syringe with three needles, lead-free, halogen-free and non-corrosive, and a 2.5 mm oxygen-free copper desoldering braid for SMD, BGA and board rework.

Form
Paste in a 10 ml syringe, title and first bullet
Chemistry
Rosin, lead-free, halogen-free, title and third bullet
Residue and cleaning
No-clean, non-corrosive, third bullet
Activity level
Absent from the listing
Volume
10 ml (10 cc), title and first bullet
Dispensing
Push-in syringe with plunger and three needles, first and fifth bullets
Handling guidance
Absent from the listing text — the syringe label in the product photograph begins “Use under well ventilated conditions”; braid of 2.5 mm, 1.5 m in the title, 3 m in the first bullet and 3.0 m on the photographed reel
Amazon reference
B0GJZWXNKM (same reference on 6 Amazon marketplaces)
EAN
0759039211566
  • A syringe and needles for placing flux precisely
  • No-clean, halogen-free, non-corrosive
  • Braid length: 1.5 m in the title, 3 m in the bullet

Best for: A board repairer doing SMD rework who wants flux on a needle and braid to lift old solder.

≈ 7 €
Check price on Amazon

Specifications

Form
Paste in a 10 ml syringe, title and first bullet
Chemistry
Rosin, lead-free, halogen-free, title and third bullet
Residue and cleaning
No-clean, non-corrosive, third bullet
Activity level
Absent from the listing
Volume
10 ml (10 cc), title and first bullet
Dispensing
Push-in syringe with plunger and three needles, first and fifth bullets
Handling guidance
Absent from the listing text — the syringe label in the product photograph begins “Use under well ventilated conditions”; braid of 2.5 mm, 1.5 m in the title, 3 m in the first bullet and 3.0 m on the photographed reel
Amazon reference
B0GJZWXNKM (same reference on 6 Amazon marketplaces)
EAN
0759039211566

The VACUBXBY flux set listing, bullet by bullet

Five bullets: 10 cc of flux paste, 2.5 mm braided copper desoldering wick, a plunger, a syringe and three needles; oxygen-free copper braid that draws off excess solder; a lead-free, halogen-free, non-corrosive no-clean flux; uses in appliance, smartphone and industrial repair and SMD, BGA rework; and a push-in design for even flow.

VACUBXBY on a needle

Flux where it is needed. A syringe puts paste on a single pad or along a row of pins, which a tin and brush cannot. The fifth bullet describes the push-in plunger for that reason.

VACUBXBY’s braid length

The title says 1.5 m of braid; the first bullet says 3 m, and the reel in the product photograph is marked 2.5 mm × 3.0 m. The syringe label in the same photograph begins with an instruction to use it under well ventilated conditions.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 7 € to 9 €.

The American and British Amazon catalogues list the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More soldering flux

  • Two 10 g tins of yellow paste labelled Soldering Flux Paste, Advanced Quality ZJ-18, neutral pH 7 ± 0.3

    YSHODGU No-clean rosin flux paste, 2 × 10 g tins

    Two 10 g metal tins of lead-free rosin flux paste from YSHODGU, sold as no-clean with less residue and little smoke, for repairing phones, motherboards, wiring and boards, and for SMT, LED and BGA work.

    Form
    Paste, title and first bullet
    Chemistry
    Rosin, lead-free, title and first bullet
    Residue and cleaning
    No-clean in the title; less residue, third bullet
    Activity level
    Absent from the listing
    Volume
    2 × 10 g, second bullet
    Dispensing
    Metal tins, second bullet
    Handling guidance
    Absent from the listing — application steps only: wipe the surface, apply paste, melt solder with the iron, fifth bullet
    Amazon reference
    B0FLDBX2HP (same reference on 6 Amazon marketplaces)
    EAN
    0607604921955
    • Two small tins, easy to carry
    • SMT, LED and BGA named
    • No activity level or flux class

    Best for: A phone or board repairer who wants a little rosin paste in a pocket-sized tin.

    ≈ 4 €
    Check price on Amazon
  • Open BOJACK tin of amber paste labelled Soldering Flux Paste, Advanced Quality ZJ-18, Nw 50 g

    BOJACK No-clean lead-free flux paste, 50 g, pH 7 ± 0.3

    A 50 g pack of flux paste from BOJACK, no-clean and lead-free according to the title, with a stated neutral pH of 7 ± 0.3, for soldering electronic components, instruments and metals and for PCB, SMD and SMT repair.

    Form
    Paste, title and first bullet
    Chemistry
    Absent from the listing — lead-free, title
    Residue and cleaning
    No-clean, title
    Activity level
    Absent from the listing — neutral pH 7 ± 0.3; “no corrosion” stated, second and fourth bullets
    Volume
    50 g (1.8 oz), title and second bullet
    Dispensing
    Absent from the listing text — the product photograph shows a screw-top metal tin
    Handling guidance
    Absent from the listing — “non-toxic” is the seller’s wording, fourth bullet
    Amazon reference
    B09P4LJG36 (same reference on 5 Amazon marketplaces)
    EAN
    0762917045382
    • A pH figure: 7 ± 0.3
    • No-clean and lead-free, as the title says
    • Flux chemistry not named

    Best for: A hobbyist soldering boards who wants a no-clean paste in a medium quantity.

    ≈ £7 / 8 €
    Check price on Amazon
  • FELDER Lötfett 20 g tin with a corrosive hazard pictogram, the word Gefahr and a zinc chloride content line

    GALLUNOPTIMAL Corrosive soldering grease F-SW 12 for copper and copper alloys, 20 g

    A 20 g tin of soldering grease from GALLUNOPTIMAL, made by FELDER in Germany, classed corrosive to F-SW 12, for soft soldering copper, brass, bronze and copper alloys in installation, repair and model work, with thorough cleaning of joints required.

    Form
    Grease, title
    Chemistry
    Active flux components, classed F-SW 12, second bullet; the tin in the product photograph states zinc chloride and DIN EN 29454.1, 3.1.1.C
    Residue and cleaning
    Corrosive; thorough cleaning of the joints required, second bullet
    Activity level
    Corrosive active flux, F-SW 12, title and second bullet
    Volume
    20 g, title and fourth bullet
    Dispensing
    Tin, fourth bullet
    Handling guidance
    Absent from the listing text — the tin in the product photograph carries a corrosive pictogram, the signal word Gefahr, a warning of serious eye damage and instructions to wear protective gloves, clothing and eye protection
    Amazon reference
    B0DZPL52G4 (same reference on 6 Amazon marketplaces)
    EAN
    4250078327714
    • A flux class given: F-SW 12, corrosive
    • Cleaning requirement stated plainly
    • Corrosive: residues must be cleaned off

    Best for: A model maker or repairer soft-soldering copper and brass who will clean every joint afterwards.

    ≈ 6 €
    Check price on Amazon

Elsewhere on the workbench

  • ERYONE PETG carbon fibre black filament spool

    ERYONE PETG carbon fibre 1.75 mm, black, 1 kg

    A 1 kg spool of black ERYONE PETG with carbon fibre, printed at 240–260 °C on a 100 °C bed, dried for 24 hours before vacuum packing and advised to be kept in resealable foil once opened.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Nozzle 240–260 °C, bed 100 °C, third bullet; the spool label in the product photograph reads 230–250 °C nozzle and 75–85 °C bed
    Drying advice
    Dried 24 hours before vacuum packing; store in resealable foil bags after opening, fifth bullet
    Net weight
    1 kg, title and second bullet
    Finish
    Absent from the listing
    Amazon reference
    B0D6G98F3K (same reference on 6 Amazon marketplaces)
    EAN
    0810168132280
    • Nozzle and bed temperatures published
    • Drying before packing and storage advice after opening
    • Two tolerances: ±0.03 mm in the title, ±0.02 mm in the bullet

    Best for: Stiff functional parts in PETG on a printer already fitted with a suitable nozzle.

    ≈ $25 / £21 / 23 €
    Check price on Amazon
  • eSUN ePLA-CF carbon fibre filled black filament spool

    eSUN PLA-CF carbon fibre filled 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN ePLA-CF: PLA with chopped carbon fibre for higher strength and flexural modulus and a matte finish, named as compatible with fast printers including the AnkerMake M5, with no nozzle guidance.

    Base polymer
    PLA, first bullet
    Filler
    Chopped carbon fibre, organically infiltrated, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing — lower water absorption than eSUN ePA-CF is stated, fourth bullet
    Net weight
    1 kg, title
    Finish
    Matte carbon fibre texture with less visible layering, second bullet
    Amazon reference
    B0CH36F58Y (same reference on 6 Amazon marketplaces)
    EAN
    0840249104332
    • Carbon fibre filler for higher strength and flexural modulus, as stated
    • A matte finish that makes layer lines less visible
    • No mention of whether a hardened nozzle is needed

    Best for: Stiff jigs, brackets and drone parts on a fast printer, once the nozzle is confirmed suitable.

    ≈ £20 / 17 €
    Check price on Amazon
  • Flashforge PETG-CF black filament spool

    Flashforge PETG carbon fibre 1.75 mm ±0.02 mm, black, 1 kg

    A 1 kg spool of black Flashforge PETG-CF in 1.75 mm ±0.02 mm, reinforced with carbon fibre for strength and heat resistance, dried for 24 hours and vacuum-sealed, whose later bullets describe PLA.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre reinforcement, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing as advice — dried 24 hours before packing, vacuum-sealed with desiccant, second bullet
    Net weight
    1 kg, title
    Finish
    Absent from the listing
    Amazon reference
    B0CNYX58SV (same reference on 6 Amazon marketplaces)
    EAN
    6937120306856
    • Carbon fibre reinforcement for strength and temperature resistance, keeping PETG’s impact resistance, as stated
    • A ±0.02 mm tolerance in the title
    • The second, third and fourth bullets describe PLA

    Best for: Stiffer PETG parts for a Flashforge owner who will set temperatures from the maker’s profile.

    ≈ $26 / 26 €
    Check price on Amazon

All soldering flux