Skip to content

The settings, and a day to acclimatise

Subli-Print AAA Classic white sublimation mugs 330 ml, 24 pack, with press settings

Twenty-four Classic sublimation mugs from Subli-Print, about 330 ml, 80 mm in diameter and 95 mm high, with a polyester-polymer high-gloss coating, each in a transport box, with processing guidance of 200 °C for 480 seconds at medium pressure, mirrored, after 24 hours at room temperature.

White mug printed with roses and butterflies beside a patterned Subli-Print box

Subli-Print AAA Classic white sublimation mugs 330 ml, 24 pack, with press settings

Twenty-four Classic sublimation mugs from Subli-Print, about 330 ml, 80 mm in diameter and 95 mm high, with a polyester-polymer high-gloss coating, each in a transport box, with processing guidance of 200 °C for 480 seconds at medium pressure, mirrored, after 24 hours at room temperature.

Coating
Subli-Print polyester-polymer high-gloss coating, second, third and fourth bullets
Size and printable area
About 330 ml, Ø about 80 mm, height about 95 mm, full-surface printable, first and third bullets
Press fit
Absent from the listing — sublimation by heat, second bullet
Recommended settings
200 °C, 480 seconds, medium pressure, mirrored design; store items 24 hours at room temperature first, fifth bullet
Finish
High-gloss, high whiteness, second and third bullets
Care advice
Dishwasher use and microwave use described, first bullet; food-contact compliance under § 31 LFGB stated, second bullet
Amazon reference
B0FZVSB944 (same reference on 6 Amazon marketplaces)
EAN
4262480234337
  • Full press settings: 200 °C, 480 s, medium, mirrored
  • Diameter and height given
  • 480 seconds given with no press type named

Best for: A mug press owner who wants the maker’s temperature and time to start from, and mugs boxed for resale.

≈ £77 / 56 €
Check price on Amazon

Specifications

Coating
Subli-Print polyester-polymer high-gloss coating, second, third and fourth bullets
Size and printable area
About 330 ml, Ø about 80 mm, height about 95 mm, full-surface printable, first and third bullets
Press fit
Absent from the listing — sublimation by heat, second bullet
Recommended settings
200 °C, 480 seconds, medium pressure, mirrored design; store items 24 hours at room temperature first, fifth bullet
Finish
High-gloss, high whiteness, second and third bullets
Care advice
Dishwasher use and microwave use described, first bullet; food-contact compliance under § 31 LFGB stated, second bullet
Amazon reference
B0FZVSB944 (same reference on 6 Amazon marketplaces)
EAN
4262480234337

The Subli-Print Classic mug listing, bullet by bullet

Five bullets: 24 AAA mugs of about 330 ml, 80 mm across and 95 mm high, each in a transport box, for dishwasher and microwave use; a high-gloss coating the design is sublimated into, with food-contact compliance under § 31 LFGB stated; high whiteness and full-surface printing; a polyester-polymer gloss glaze and shock-proof boxes; and guide values of 200 °C, 480 seconds, medium pressure and a mirrored design, after 24 hours at room temperature.

Subli-Print’s settings

200 °C, 480 seconds, medium. The fifth bullet gives temperature, time, pressure and mirroring, and the acclimatisation step before them. It calls them guide values that paper, ink and ambient temperature can shift.

Subli-Print on paper and mugs

The same brand sells the A4 paper on this site, with its own print settings. Together, the two listings give a full starting point from printer to press.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 56 € to 73 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More sublimation blanks

  • Plain white ceramic mug with a round handle

    Tassendruck White ceramic sublimation mugs 300 ml, 12 pack

    Twelve white ceramic sublimation mugs from Tassendruck, 300 ml, 9.5 cm high and 8 cm in diameter, weighing 350 g, described as dishwasher-proof and microwave-safe and suitable only for sublimation printing.

    Coating
    Sublimation layer; for sublimation printing only, first and fourth bullets
    Size and printable area
    300 ml, height 9.5 cm, diameter 8 cm, second bullet; printable area not given
    Press fit
    Absent from the listing — thermal printing with sublimation ink, first bullet
    Recommended settings
    Absent from the listing — results depend on print parameters, third bullet
    Finish
    White ceramic, 350 g, first and second bullets
    Care advice
    Dishwasher-proof and microwave-safe, second bullet
    Amazon reference
    B096Y1HVBN (same reference on 1 Amazon marketplace)
    EAN
    4251739386699
    • Height, diameter, weight and volume given
    • Dishwasher-proof and microwave-safe, as the second bullet says
    • No press settings

    Best for: A mug press owner who can check an 8 cm diameter and 9.5 cm height against the press.

    ≈ 44 €
    Check price on Amazon
  • Blanks laid out: zip bags, mouse pads, pillow covers, a garden flag on a stand, coasters, keychains in three shapes and teardrop earrings

    AMDAILY Assorted sublimation blanks set: pillow covers, mouse pads, bags, flags, coasters, keychains, earrings

    A mixed set of sublimation blanks from AMDAILY — four pillow covers, four mouse pads, four make-up bags, four garden flags, twelve coasters, thirty-six keychains and sixteen earrings with their fittings — pressed at about 180–190 °C for 50–70 seconds under medium pressure.

    Coating
    Thermal transfer layer on neoprene, aluminium, wood, paper and polyester, second bullet
    Size and printable area
    Absent from the listing as sizes — 4 pillow covers, 4 mouse pads, 4 make-up bags, 4 garden flags, 12 coasters, 36 keychains with 36 fittings and 16 earrings with 16 hooks, first bullet; 114 pieces in the title
    Press fit
    Heat press, fourth and fifth bullets
    Recommended settings
    About 180–190 °C, 50–70 seconds, medium pressure, given as a reference, fourth bullet
    Finish
    Peach-skin polyester pillow covers, natural rubber mouse pads, protective film on both sides of earrings and keychains, third bullet
    Care advice
    Make-up bags and garden flags can be washed repeatedly, third bullet
    Amazon reference
    B0B388VXVK (same reference on 6 Amazon marketplaces)
    EAN
    0738627368400
    • A press setting given: 180–190 °C, 50–70 s, medium pressure
    • Seven kinds of blank in one set
    • 114 in the title; the contents add up to 80 blanks, or 132 with fittings

    Best for: A new heat press owner trying sublimation on several kinds of blank before buying any one in bulk.

    ≈ $21 / 30 €
    Check price on Amazon
  • Rounded-corner magnet blanks with white faces and black backs, some printed with photos on a fridge

    Calenxy Sublimation fridge magnet blanks 7.5 × 5.5 cm, 50 pieces

    Fifty sublimation magnet blanks from Calenxy, about 7.5 × 5.5 cm, in resin with a sublimation coating and a flexible magnetic back, printed in an oven or heat press and easy to cut into other shapes.

    Coating
    Stable sublimation coating on synthetic resin, first bullet
    Size and printable area
    About 7.5 × 5.5 cm, third bullet; 50 pieces in the title
    Press fit
    Oven or heat press, second bullet
    Recommended settings
    Absent from the listing
    Finish
    Absent from the listing — flexible magnetic back, first bullet
    Care advice
    Absent from the listing
    Amazon reference
    B0GSKBM1DW (same reference on 6 Amazon marketplaces)
    EAN
    0756993099674
    • Fifty blanks
    • Cuttable to custom shapes, as the fourth bullet says
    • No temperature or time

    Best for: A heat press owner making batches of small photo magnets as gifts.

    ≈ 14 €
    Check price on Amazon

Elsewhere on the workbench

  • eSUN black TPU-95A filament spool

    eSUN TPU-95A 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN TPU-95A in 1.75 mm, listing resistance to oil, solvents, scratches, tearing and weather, with good winding, in a vacuum-sealed bag with desiccant and no print settings.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing as a figure — very tight tolerance described, third bullet
    Net weight
    1 kg net, title and fifth bullet
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B07PM2R9ZM (same reference on 6 Amazon marketplaces)
    EAN
    0781520911426
    • Resistance to oil, solvents, scratches, tearing, flexing and weather named
    • Net filament weight stated as 1 kg
    • No tolerance figure

    Best for: Flexible parts exposed to oil or outdoor conditions, such as gaskets, bumpers and straps.

    ≈ $28 / £19 / 18 €
    Check price on Amazon
  • OVERTURE white TPU filament spool

    OVERTURE TPU 95A 1.75 mm, white, stretches over three times its length

    White OVERTURE TPU 95A in 1.75 mm, described as stretching to more than three times its original length without breaking and keeping for a year unopened when stored properly, with no spool weight given in the text.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    Absent from the listing text — the spool label in the photograph reads 1 kg
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Absent from the listing — a 1-year shelf life for unopened spools stored properly is stated, fifth bullet
    Amazon reference
    B09RFGDC6Q (same reference on 4 Amazon marketplaces)
    EAN
    0810031298686
    • Shore 95A and an elongation claim of more than three times the original length
    • Guidance that wall thickness and infill tune flexibility and stiffness
    • No weight in the text; only the photographed spool label reads 1 kg

    Best for: Flexible wearables and phone cases where tuning stiffness through infill is part of the design.

    ≈ 17 €
    Check price on Amazon
  • GEEETECH black TPU 95A filament spool

    GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

    A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

    Shore hardness
    95A, title and first two bullets
    Diameter tolerance
    Absent from the listing text — the spool label in the photograph reads ±0.03 mm
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
    Extruder guidance
    Absent from the listing
    Packaging
    Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
    Amazon reference
    B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
    EAN
    6974994174716
    • Dried for 24 hours before sealing, in a resealable foil bag
    • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
    • No print temperatures or speed

    Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

    ≈ 18 €
    Check price on Amazon

All sublimation blanks