Skip to content

Brand

YOOPAI

A cold plate and storage boxes

The YOOPAI plate

A 257 × 257 mm cold plate giving bed temperatures per material and a plain list of what to avoid: not ABS or TPU.

YOOPAI boxes

Six 4.0 L boxes with outside dimensions stated, desiccant and labels, and no description of the seal.

YOOPAI parts and supplies, each one on the bench

  • YOOPAI green plate printed PLA/PETG and Cool Plate Ultra Tack along its front edge

    YOOPAI Cold plate 257 × 257 mm for Bambu Lab 3D printers, with identification code

    A green 257 × 257 mm cold-print plate for Bambu Lab 3D printers that grips PLA at 45–55 °C and PETG at 50–70 °C, with an identification code for the X1C and X1E, a scraper, and a warning against ABS and TPU.

    Size and fit
    257 × 257 mm for Bambu Lab A1, P2S, X2D, P1P, P1S, X1C and X1E, title and fourth bullet
    Substrate
    Flexible steel plate, third bullet
    Surface type
    Textured cold-print surface, green, title and third bullet; identification code for automatic bed levelling on X1C and X1E, fourth bullet
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA at 45–55 °C and PETG at 50–70 °C; not recommended for ABS or TPU, second bullet
    Heat limit
    Absent from the listing
    Amazon reference
    B0FNMPXGFP (same reference on 6 Amazon marketplaces)
    EAN
    0850078714053
    • Bed temperatures given per material: PLA 45–55 °C, PETG 50–70 °C
    • An identification code for X1C and X1E automatic bed levelling
    • Not recommended for ABS or TPU

    Best for: A Bambu Lab 3D printer owner printing large PLA and PETG parts who wants lower bed temperatures and less warping.

    ≈ $18 / £18 / 15 €
    Check price on Amazon
  • Six transparent boxes stacked in two rows, each holding a spool with a kraft label reading PLA, PETG or TPU

    YOOPAI Filament storage boxes 4.0 L, 6 pack, with desiccant and labels

    Six 4.0 L filament storage boxes from YOOPAI, 24.6 × 24.1 × 11.2 cm each, described as waterproof and dust-protected, with desiccant and labels for PLA, PETG, ABS and TPU.

    Capacity and spool fit
    4.0 L per box, 24.6 × 24.1 × 11.2 cm; 1.75 mm filaments, first, fourth and fifth bullets; no spool size given
    Seal type
    Absent from the listing — waterproof and dust-protected construction, second bullet
    Desiccant method
    Desiccant included, amount and type not given, second bullet
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    Set of 6 portable boxes with labels for PLA, PETG, ABS and TPU, first, third and fourth bullets
    Amazon reference
    B0F8B8C9Q6 (same reference on 6 Amazon marketplaces)
    EAN
    0850075053483
    • Box dimensions given: 24.6 × 24.1 × 11.2 cm
    • Six boxes in the set
    • No seal description

    Best for: A maker needing six boxes who can check the 24.6 × 24.1 × 11.2 cm dimensions against their spools.

    ≈ $34 / £28 / 30 €
    Check price on Amazon

A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.