Skip to content

Motor included, three bullets long

HOCENWAY Orbiter V1.5 dual drive direct extruder with MOONS motor

An Orbiter V1.5 dual drive direct extruder sold by HOCENWAY with a MOONS motor and a glass fibre reinforced nylon shell, for Ender, CR-10, BLV, Voron V2.4 and Prusa MK3S 3D printers, described in three short bullets.

Black compact direct drive extruder with a round motor, coloured wires, tension knob and push-in fitting

HOCENWAY Orbiter V1.5 dual drive direct extruder with MOONS motor

An Orbiter V1.5 dual drive direct extruder sold by HOCENWAY with a MOONS motor and a glass fibre reinforced nylon shell, for Ender, CR-10, BLV, Voron V2.4 and Prusa MK3S 3D printers, described in three short bullets.

Printer fit
Ender 3 V2, Ender 3 Pro, Ender 5 Plus, CR-10, BLV, Voron V2.4 and Prusa MK3S, and TPU printing on DDE-O, title
Direct drive or Bowden
Direct drive, dual drive, title
Gear ratio
Absent from the listing
Drive gears
High-quality internal gears, third bullet
Filament path
Absent from the listing
Weight
Absent from the listing
Firmware figure
Absent from the listing
Amazon reference
B099NLFH4G (same reference on 6 Amazon marketplaces)
EAN
0791548328199
  • A MOONS motor included, with strong torque and good thermal control stated
  • A glass fibre reinforced nylon shell
  • Three short bullets, one of them in English

Best for: A Voron, Ender or Prusa MK3S builder moving to a direct drive Orbiter-type extruder who can find the settings elsewhere.

≈ $46 / £49 / 44 €
Check price on Amazon

Specifications

Printer fit
Ender 3 V2, Ender 3 Pro, Ender 5 Plus, CR-10, BLV, Voron V2.4 and Prusa MK3S, and TPU printing on DDE-O, title
Direct drive or Bowden
Direct drive, dual drive, title
Gear ratio
Absent from the listing
Drive gears
High-quality internal gears, third bullet
Filament path
Absent from the listing
Weight
Absent from the listing
Firmware figure
Absent from the listing
Amazon reference
B099NLFH4G (same reference on 6 Amazon marketplaces)
EAN
0791548328199

The HOCENWAY Orbiter V1.5 listing, bullet by bullet

Three bullets: a MOONS motor with strong torque and good thermal control; a shell of injection-moulded glass fibre reinforced nylon; and high-quality internal gears. The title adds dual drive direct extrusion, a motor in the box and a list of printers from the Ender 3 V2 to the Voron V2.4 and Prusa MK3S.

HOCENWAY’s Orbiter, briefly

Three bullets for a direct drive extruder. Motor brand, shell material and gears are named; gear ratio, weight, E-steps and mounting are not. Every one of those matters when moving a printer from Bowden to direct drive.

The motor in the HOCENWAY box

The title says the extruder comes with its motor, and the first bullet names MOONS. The product photograph shows the round motor attached, its coloured wires bundled. That separates it from the Titan-style Redrex on this site, which is sold without one.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 44 € to 56 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More extruders

  • Dark grey extruder with a red swing arm and three engraved logos, one of them the Creality triangle

    Creality DXC extruder kit for K1, K1 Max and K1C, with filament break detection

    Creality’s DXC extruder kit for the K1, K1 Max and K1C 3D printers, with Phaetus Runice RNC-coated dual gears, an integrated filament break sensor, active cooling and plug-and-play fitting, named for filaments from PA-CF to TPU 85A.

    Printer fit
    Creality K1, K1 Max and K1C, title and sixth bullet
    Direct drive or Bowden
    Absent from the listing
    Gear ratio
    Absent from the listing
    Drive gears
    Dual gear design with 200 % larger contact area stated; RNC-3300 coating stated to triple service life against standard extruders and cut wear by 60 %, first and fourth bullets
    Filament path
    Integrated sensor for feed failures and filament breaks, second bullet; active cooling against heat build-up, fifth bullet
    Weight
    Absent from the listing
    Firmware figure
    No firmware update needed, sixth bullet
    Amazon reference
    B0FBR3YBCT (same reference on 5 Amazon marketplaces)
    EAN
    0198549053707
    • Made for the K1C reviewed on this site, with no firmware update needed
    • A built-in sensor for filament breaks and feed failures
    • Triple life, 60 % less wear and 200 % more contact are stated without conditions

    Best for: A Creality K1C or K1 owner replacing the extruder and wanting filament break detection on it.

    ≈ 48 €
    Check price on Amazon
  • Black extruder labelled Dual Drive Extruder, with a knurled tension knob on a spring

    Iverntech Dual drive Bowden extruder, 3:1 gearing, with motor bracket

    A dual drive Bowden extruder from Iverntech with an internal 3:1 gear ratio, a recommended E-steps value of 385, a knurled screw to set gear pressure on the filament, and a universal stepper motor bracket.

    Printer fit
    CR-10, Ender 3 series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa i3 DIY 3D printers, title; “most 3D printers and filaments”, third bullet
    Direct drive or Bowden
    Bowden, first and fourth bullets
    Gear ratio
    3:1 internal, first bullet
    Drive gears
    Dual drive gears with a knurled screw tensioner to set their pressure on the filament, first and second bullets
    Filament path
    Absent from the listing
    Weight
    Absent from the listing
    Firmware figure
    Recommended E-steps: 385, first bullet
    Amazon reference
    B08PZ1RKJK (same reference on 5 Amazon marketplaces)
    EAN
    0745895585453
    • A recommended E-steps value: 385
    • Gear ratio stated: 3:1
    • No filament path description

    Best for: A Bowden printer owner replacing a single-gear extruder who is ready to set E-steps to 385.

    ≈ 11 €
    Check price on Amazon
  • Red aluminium extruder with its gears, a yellow tension spring and a push-in fitting

    POLISI3D Aluminium dual gear extruder, CR-10S Pro style, kit to assemble

    A dual gear extruder from POLISI3D in aluminium alloy, designed for the CR-10S Pro and fitting CR-10, Ender 3, Ender 5 and Tornado 3D printers, supplied as a kit to assemble and described without a gear ratio or E-steps value.

    Printer fit
    CR-10 (1.75 mm), CR-10S, Ender-3 and Ender-3 Pro, first bullet; CR-10 S4, S5, Ender-5 and Tornado in the title and third bullet; designed for the CR-10S Pro
    Direct drive or Bowden
    Absent from the listing
    Gear ratio
    Absent from the listing
    Drive gears
    Dual gear extrusion mechanism, title and second bullet
    Filament path
    Absent from the listing
    Weight
    Absent from the listing
    Firmware figure
    Absent from the listing
    Amazon reference
    B07W6SW4TN (same reference on 6 Amazon marketplaces)
    EAN
    0791300409524
    • All-metal aluminium alloy body
    • Dual gears for extrusion force, as the second bullet states
    • Must be assembled by the buyer

    Best for: A CR-10 or Ender 3 owner who wants a metal dual gear extruder and will assemble and calibrate it.

    ≈ $10 / 12 €
    Check price on Amazon

Elsewhere on the workbench

  • KOYOFEI pack of FEP film sheets

    KOYOFEI FEP film 140 × 200 mm, 0.15 mm, 6 sheets

    Six 140 × 200 × 0.15 mm FEP sheets from KOYOFEI for resin printers including the Mars 2 and 3 series, Photon Mono, Mono 4K and Halot One, with 95 % light transmission stated and instructions printed on the packaging.

    Sheet size
    140 × 200 mm, title and first bullet
    Thickness
    0.15 mm, title and first bullet
    Material
    FEP, title
    Pre-mounted frames
    Absent from the listing
    Pack count
    6 sheets, title
    Printer fit
    Mars, Mars Pro, Mars 2, Mars 2 Pro, Mars 3, Mars 3 Pro, Photon Mono, Mono 4K, Halot One, LD-002R and LD-002H, first bullet
    Amazon reference
    B091MYV2WD (same reference on 6 Amazon marketplaces)
    EAN
    8424511433003
    • Six sheets in a pack
    • Replacement instructions printed on the packaging
    • Unframed sheets

    Best for: An owner of a Mars 2 or 3, Photon Mono or Halot One who changes film often.

    ≈ $10
    Check price on Amazon
  • Phrozen nFEP PFA release film sheet

    Phrozen PFA (nFEP) release film, A4, 210 × 290 mm, 1 sheet

    A single A4 sheet of Phrozen nFEP release film, made of PFA, for Phrozen printers from the Sonic Mini 8K S to the Shuffle series, described as releasing prints more easily and resisting heat better than ordinary FEP.

    Sheet size
    210 × 290 mm, A4 format, title
    Thickness
    Absent from the listing
    Material
    PFA, sold as nFEP, title and second bullet
    Pre-mounted frames
    Absent from the listing
    Pack count
    1 sheet, title
    Printer fit
    Phrozen Sonic Mini 8K S, Sonic Mini 8K, Sonic Mighty 4K, Sonic 4K 2022, Sonic Mini 4K, Sonic 4K, Shuffle 4K, Sonic Mini, Sonic, Shuffle Lite, Shuffle 2019 and 2018, Phrozen Make, first bullet
    Amazon reference
    B092V2NRSG (same reference on 5 Amazon marketplaces)
    EAN
    4711117880107
    • Made by Phrozen for its own printers, including the Sonic Mini 8K S reviewed here
    • PFA film described as releasing prints more easily than FEP
    • A single sheet

    Best for: A Sonic Mini 8K S or other Phrozen owner replacing the vat film with the maker’s own PFA.

    ≈ 24 €
    Check price on Amazon
  • UniTak3D FEP film sheets for resin 3D printers

    UniTak3D FEP film 140 × 200 mm, 2 sheets

    Two FEP sheets from UniTak3D, 140 × 200 mm and 0.15 mm thick, for 5.5-inch resin printers such as the Photon, Photon S, Mars and Mars 2 Pro, stated to transmit over 95 % of light and resist 204 °C.

    Sheet size
    140 × 200 mm, title and fifth bullet
    Thickness
    0.15 mm, fifth bullet; the box in the product photograph reads 0.127 mm
    Material
    FEP, title
    Pre-mounted frames
    Absent from the listing
    Pack count
    2 sheets, title
    Printer fit
    ELEGOO Mars, Anycubic Photon and Photon S, Mars 2 Pro, LD-002R and LD-002H, Wanhao Duplicator 7, Monoprice Mini Deluxe SLA, EPAX X1, QIDI Tech, Longer Orange and other 5.5-inch printers, title and fourth bullet
    Amazon reference
    B0872BNB9Y (same reference on 6 Amazon marketplaces)
    EAN
    0605175677165
    • Sheet size and thickness published
    • A long list of named 5.5-inch printers
    • Only two sheets, with 0.15 mm in the text and 0.127 mm on the photographed box

    Best for: Replacing the film on an older 5.5-inch resin printer from the named list.

    ≈ 10 €
    Check price on Amazon

All extruders