Skip to content

Properties in words, settings nowhere

eSUN PETG Basic 1.75 mm, black, 1 kg

A 1 kg spool of black eSUN PETG Basic in 1.75 mm, described as tough, glossy, weather- and chemical-resistant with good winding, sealed in a vacuum bag with desiccant, and published without a tolerance figure or print settings.

eSUN PETG Basic black filament spool

eSUN PETG Basic 1.75 mm, black, 1 kg

A 1 kg spool of black eSUN PETG Basic in 1.75 mm, described as tough, glossy, weather- and chemical-resistant with good winding, sealed in a vacuum bag with desiccant, and published without a tolerance figure or print settings.

Diameter tolerance
Absent from the listing as a figure — “minimal tolerance” and tight diameter tolerance are described, third and fourth bullets
Net weight
1 kg, title
Recommended temperatures
Absent from the listing
Adhesion guidance
Absent from the listing — good layer bonding is claimed, third bullet
Moisture packaging
Vacuum-sealed bag with desiccant, fifth bullet
Transparency
Described as having excellent clarity, light transmission and high gloss, first bullet
Spool size
Absent from the listing
Amazon reference
B0DDTFL214 (same reference on 5 Amazon marketplaces)
EAN
6922572209060
  • Weather and chemical resistance named, with toughness close to ABS as described
  • Good winding without overlaps, as the fourth bullet states
  • Tolerance described but not given as a figure

Best for: General PETG parts such as containers and accessories, printed from a known profile.

≈ 12 €
Check price on Amazon

Specifications

Diameter tolerance
Absent from the listing as a figure — “minimal tolerance” and tight diameter tolerance are described, third and fourth bullets
Net weight
1 kg, title
Recommended temperatures
Absent from the listing
Adhesion guidance
Absent from the listing — good layer bonding is claimed, third bullet
Moisture packaging
Vacuum-sealed bag with desiccant, fifth bullet
Transparency
Described as having excellent clarity, light transmission and high gloss, first bullet
Spool size
Absent from the listing
Amazon reference
B0DDTFL214 (same reference on 5 Amazon marketplaces)
EAN
6922572209060

The eSUN PETG Basic listing, bullet by bullet

Five bullets: PETG combining PLA and ABS advantages, with clarity, light transmission, gloss, impact toughness, weather and chemical resistance; ABS-like toughness with PLA-like ease; minimal tolerance and warping for stable prints; good roundness and winding without tangles or clogging; and a vacuum-sealed bag with desiccant.

Tolerance as an adjective

“Minimal” and “tight”, twice, without a number. Kingroon and SUNLU both give ±0.02 mm. A tolerance is only useful as a figure, and here it stays a description.

Clarity on a black spool

The first bullet describes excellent clarity and light transmission. Those are properties of PETG in natural or clear colours; on black filament they will not be visible.

Settings left out of the eSUN page

No nozzle or bed temperature and no spool size. A PETG profile from the printer maker is the practical starting point.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 12 € to 16 €.

The British Amazon catalogue lists the product, yet no seller was offering it.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More PETG filament

  • Kingroon black PETG filament spool

    Kingroon PETG 1.75 mm ±0.02 mm, black, 1 kg

    A 1 kg spool of black Kingroon PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing states heat resistance up to 84 °C and flexural strength up to 69.6 MPa, vacuum-sealed with desiccant.

    Diameter tolerance
    ±0.02 mm, title and fourth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing — heat resistance of up to 84 °C is stated for printed parts, second bullet
    Adhesion guidance
    Absent from the listing — strong layer adhesion is claimed, fifth bullet
    Moisture packaging
    Vacuum-sealed with desiccant, fifth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0C6G8MDZX (same reference on 5 Amazon marketplaces)
    EAN
    0749684714185
    • Material figures published: heat resistance to 84 °C, flexural strength to 69.6 MPa
    • A ±0.02 mm tolerance and tangle-free winding
    • No print temperatures or bed guidance

    Best for: Functional brackets, tool holders and enclosures where a published heat and strength figure helps choose a material.

    ≈ 10 €
    Check price on Amazon
  • SUNLU black PETG filament spool

    SUNLU PETG 1.75 mm, black, 1 kg, with print settings

    A 1 kg spool of black SUNLU PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing recommends a 220–230 °C nozzle, a 60–70 °C bed and speeds from 40 to 600 mm/s, in airtight vacuum packaging.

    Diameter tolerance
    ±0.02 mm, eighth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Nozzle 220–230 °C, bed 60–70 °C, print speed 40–600 mm/s, seventh bullet
    Adhesion guidance
    Absent from the listing as guidance — excellent layer adhesion is claimed, second bullet
    Moisture packaging
    Airtight vacuum packaging, ninth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B07TJDTJZD (same reference on 5 Amazon marketplaces)
    EAN
    0768894219198
    • Recommended nozzle, bed and speed settings published
    • A ±0.02 mm tolerance
    • No desiccant mentioned

    Best for: A first PETG spool, printed from the settings on the listing.

    ≈ £13 / 14 €
    Check price on Amazon
  • 3DHoJor white PETG filament spool

    3DHoJor PETG 1.75 mm, white, 1 kg, dried and vacuum-sealed

    A 1 kg spool of white 3DHoJor PETG in 1.75 mm, dried for 24 hours and vacuum-sealed with desiccant, described as tough, moisture-resistant and glossy, with no tolerance or print settings published.

    Diameter tolerance
    Absent from the listing — 1.75 mm in the title
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Adhesion guidance
    Absent from the listing — printing without warping or shrinking is claimed, second bullet
    Moisture packaging
    Dried for 24 hours, then vacuum-sealed with a desiccant bag, fifth bullet
    Transparency
    Described as glossy with high clarity and light transmission, fourth bullet
    Spool size
    Absent from the listing
    Amazon reference
    B0F18YP1CJ (same reference on 6 Amazon marketplaces)
    EAN
    0614141603473
    • Dried for 24 hours before vacuum sealing with desiccant
    • The cheapest PETG of the four here
    • No diameter tolerance

    Best for: Everyday PETG parts for someone who will set temperatures from their own printer profile.

    ≈ $12 / £11 / 9 €
    Check price on Amazon

Elsewhere on the workbench

  • Two Creality Ender PLA filament spools in black and white

    Creality Ender PLA 1.75 mm, black and white, two 1 kg spools

    Creality Ender PLA in 1.75 mm black and white, sold as a two-pack of 1 kg spools in the title and described as a four-pack in the first bullet, with low shrinkage and EPC automatic winding.

    Diameter and tolerance
    1.75 mm, fifth bullet; no tolerance figure given
    Net weight
    2 × 1 kg in the title; the first bullet refers to a 4-pack
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — black and white, title
    Winding
    EPC automatic winding with precise diameter, third bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0BY25RJLH (same reference on 5 Amazon marketplaces)
    EAN
    6971636405528
    • A multi-pack from a printer maker, for 1.75 mm FFF printers
    • EPC automatic winding for tangle-free feeding
    • Two-pack in the title, four-pack in the first bullet

    Best for: A Creality printer owner who wants black and white PLA in bulk, once the pack size has been confirmed.

    ≈ 30 €
    Check price on Amazon
  • eSUN PLA Basic white filament spool

    eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

    A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

    Diameter and tolerance
    1.75 mm ±0.03 mm, title
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — white, title
    Winding
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
    EAN
    6922572205635
    • Formulated for high-speed printing, with compatible printers named
    • Vacuum-sealed with a desiccant bag
    • A ±0.03 mm tolerance, looser than the ±0.02 mm of four other PLAs here

    Best for: Fast CoreXY and high-speed bed-slinger printers, including the AnkerMake M5 reviewed on this site.

    ≈ £12 / 13 €
    Check price on Amazon
  • GEEETECH black PLA filament spool beside a black printed figure

    GEEETECH PLA 1.75 mm, black, 1 kg spool

    A spool of black GEEETECH PLA in 1.75 mm with a ±0.02 mm tolerance and a printing range of 190–220 °C, vacuum-packed, whose weight is given as 1 kg in the title and 1.1 kg in the first bullet.

    Diameter and tolerance
    1.75 mm ±0.02 mm, first and fourth bullets
    Net weight
    1 kg in the title; 1.1 kg spool in the first bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Printing temperature 190–220 °C, third bullet; no bed temperature
    Finish
    Absent from the listing — black, title
    Winding
    Absent from the listing
    Packaging
    Vacuum packaging, first bullet
    Amazon reference
    B071DM81ZK (same reference on 5 Amazon marketplaces)
    EAN
    0718399619665
    • A published printing temperature range, 190–220 °C
    • Vacuum packaging and a ±0.02 mm tolerance
    • Weight given as 1 kg in the title and 1.1 kg in the bullets

    Best for: A PLA user who wants a stated temperature range to start tuning from.

    ≈ 12 €
    Check price on Amazon

All PETG filament