Skip to content

Material figures on the label, not settings

Kingroon PETG 1.75 mm ±0.02 mm, black, 1 kg

A 1 kg spool of black Kingroon PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing states heat resistance up to 84 °C and flexural strength up to 69.6 MPa, vacuum-sealed with desiccant.

Kingroon black PETG filament spool

Kingroon PETG 1.75 mm ±0.02 mm, black, 1 kg

A 1 kg spool of black Kingroon PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing states heat resistance up to 84 °C and flexural strength up to 69.6 MPa, vacuum-sealed with desiccant.

Diameter tolerance
±0.02 mm, title and fourth bullet
Net weight
1 kg, title
Recommended temperatures
Absent from the listing — heat resistance of up to 84 °C is stated for printed parts, second bullet
Adhesion guidance
Absent from the listing — strong layer adhesion is claimed, fifth bullet
Moisture packaging
Vacuum-sealed with desiccant, fifth bullet
Transparency
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B0C6G8MDZX (same reference on 5 Amazon marketplaces)
EAN
0749684714185
  • Material figures published: heat resistance to 84 °C, flexural strength to 69.6 MPa
  • A ±0.02 mm tolerance and tangle-free winding
  • No print temperatures or bed guidance

Best for: Functional brackets, tool holders and enclosures where a published heat and strength figure helps choose a material.

≈ 10 €
Check price on Amazon

Specifications

Diameter tolerance
±0.02 mm, title and fourth bullet
Net weight
1 kg, title
Recommended temperatures
Absent from the listing — heat resistance of up to 84 °C is stated for printed parts, second bullet
Adhesion guidance
Absent from the listing — strong layer adhesion is claimed, fifth bullet
Moisture packaging
Vacuum-sealed with desiccant, fifth bullet
Transparency
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B0C6G8MDZX (same reference on 5 Amazon marketplaces)
EAN
0749684714185

The Kingroon PETG listing, bullet by bullet

Five bullets: several pack sizes of 1.75 mm filament for most FDM printers; heat resistance up to 84 °C for functional and outdoor parts; flexural strength up to 69.6 MPa for brackets, tools and housings; a ±0.02 mm tolerance and tangle-free winding; and low warping, no odour and vacuum-sealed packaging with desiccant.

Material figures, not part figures

84 °C and 69.6 MPa describe the material. A printed part’s strength depends on orientation, infill and layer bonding, and its heat limit on its shape and load. The figures help compare filaments; they do not predict what a bracket will survive.

Settings missing from the Kingroon page

Material properties are given; nozzle and bed temperatures are not. Those are the numbers a first print needs.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 10 € to 15 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More PETG filament

  • SUNLU black PETG filament spool

    SUNLU PETG 1.75 mm, black, 1 kg, with print settings

    A 1 kg spool of black SUNLU PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing recommends a 220–230 °C nozzle, a 60–70 °C bed and speeds from 40 to 600 mm/s, in airtight vacuum packaging.

    Diameter tolerance
    ±0.02 mm, eighth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Nozzle 220–230 °C, bed 60–70 °C, print speed 40–600 mm/s, seventh bullet
    Adhesion guidance
    Absent from the listing as guidance — excellent layer adhesion is claimed, second bullet
    Moisture packaging
    Airtight vacuum packaging, ninth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B07TJDTJZD (same reference on 5 Amazon marketplaces)
    EAN
    0768894219198
    • Recommended nozzle, bed and speed settings published
    • A ±0.02 mm tolerance
    • No desiccant mentioned

    Best for: A first PETG spool, printed from the settings on the listing.

    ≈ £13 / 14 €
    Check price on Amazon
  • 3DHoJor white PETG filament spool

    3DHoJor PETG 1.75 mm, white, 1 kg, dried and vacuum-sealed

    A 1 kg spool of white 3DHoJor PETG in 1.75 mm, dried for 24 hours and vacuum-sealed with desiccant, described as tough, moisture-resistant and glossy, with no tolerance or print settings published.

    Diameter tolerance
    Absent from the listing — 1.75 mm in the title
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Adhesion guidance
    Absent from the listing — printing without warping or shrinking is claimed, second bullet
    Moisture packaging
    Dried for 24 hours, then vacuum-sealed with a desiccant bag, fifth bullet
    Transparency
    Described as glossy with high clarity and light transmission, fourth bullet
    Spool size
    Absent from the listing
    Amazon reference
    B0F18YP1CJ (same reference on 6 Amazon marketplaces)
    EAN
    0614141603473
    • Dried for 24 hours before vacuum sealing with desiccant
    • The cheapest PETG of the four here
    • No diameter tolerance

    Best for: Everyday PETG parts for someone who will set temperatures from their own printer profile.

    ≈ $12 / £11 / 9 €
    Check price on Amazon
  • eSUN PETG Basic black filament spool

    eSUN PETG Basic 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN PETG Basic in 1.75 mm, described as tough, glossy, weather- and chemical-resistant with good winding, sealed in a vacuum bag with desiccant, and published without a tolerance figure or print settings.

    Diameter tolerance
    Absent from the listing as a figure — “minimal tolerance” and tight diameter tolerance are described, third and fourth bullets
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Adhesion guidance
    Absent from the listing — good layer bonding is claimed, third bullet
    Moisture packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Transparency
    Described as having excellent clarity, light transmission and high gloss, first bullet
    Spool size
    Absent from the listing
    Amazon reference
    B0DDTFL214 (same reference on 5 Amazon marketplaces)
    EAN
    6922572209060
    • Weather and chemical resistance named, with toughness close to ABS as described
    • Good winding without overlaps, as the fourth bullet states
    • Tolerance described but not given as a figure

    Best for: General PETG parts such as containers and accessories, printed from a known profile.

    ≈ 12 €
    Check price on Amazon

Elsewhere on the workbench

  • eSUN PLA Basic white filament spool

    eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

    A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

    Diameter and tolerance
    1.75 mm ±0.03 mm, title
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — white, title
    Winding
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
    EAN
    6922572205635
    • Formulated for high-speed printing, with compatible printers named
    • Vacuum-sealed with a desiccant bag
    • A ±0.03 mm tolerance, looser than the ±0.02 mm of four other PLAs here

    Best for: Fast CoreXY and high-speed bed-slinger printers, including the AnkerMake M5 reviewed on this site.

    ≈ £12 / 13 €
    Check price on Amazon
  • GEEETECH black PLA filament spool beside a black printed figure

    GEEETECH PLA 1.75 mm, black, 1 kg spool

    A spool of black GEEETECH PLA in 1.75 mm with a ±0.02 mm tolerance and a printing range of 190–220 °C, vacuum-packed, whose weight is given as 1 kg in the title and 1.1 kg in the first bullet.

    Diameter and tolerance
    1.75 mm ±0.02 mm, first and fourth bullets
    Net weight
    1 kg in the title; 1.1 kg spool in the first bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Printing temperature 190–220 °C, third bullet; no bed temperature
    Finish
    Absent from the listing — black, title
    Winding
    Absent from the listing
    Packaging
    Vacuum packaging, first bullet
    Amazon reference
    B071DM81ZK (same reference on 5 Amazon marketplaces)
    EAN
    0718399619665
    • A published printing temperature range, 190–220 °C
    • Vacuum packaging and a ±0.02 mm tolerance
    • Weight given as 1 kg in the title and 1.1 kg in the bullets

    Best for: A PLA user who wants a stated temperature range to start tuning from.

    ≈ 12 €
    Check price on Amazon
  • SUNLU PLA+ white filament spool

    SUNLU PLA+ 1.75 mm, white, 1 kg

    A 1 kg spool of white SUNLU PLA+ in 1.75 mm with a ±0.02 mm tolerance, on a spool whose diameter, width and hole size are all published, wound by machine and inspected by hand.

    Diameter and tolerance
    1.75 mm ±0.02 mm, third bullet
    Net weight
    1 kg, title
    Spool size
    Diameter 20.32 cm, width 6.35 cm, hole 5.59 cm, fourth bullet
    Recommended temperatures
    Absent from the listing
    Finish
    PLA+, white; described as stronger than normal PLA with brighter colours, first bullet
    Winding
    Fully mechanical winding with manual inspection, no overlaps, second and third bullets
    Packaging
    Absent from the listing
    Amazon reference
    B07XFL3XB9 (same reference on 5 Amazon marketplaces)
    EAN
    0747045295922
    • Spool diameter, width and hole size published, so holder fit can be checked
    • A ±0.02 mm diameter tolerance
    • No recommended print temperatures

    Best for: Everyday PLA printing on an FDM printer whose spool holder needs checked dimensions.

    ≈ 11 €
    Check price on Amazon

All PETG filament