Skip to content

The small Silhouette size

Prime Vinyl Standard grip cutting mats 30.5 × 20.3 cm for Silhouette Portrait, 3 pack

Three transparent standard grip cutting mats from Prime Vinyl, 30.5 × 20.3 cm (12 × 8 in) with a grid, made for Silhouette Portrait cutting machines, holding vinyl, craft paper, sticker paper and light card, in reusable PVC with a protective film.

Three transparent StandardGrip mats with inch grids, labelled 8 in × 12 in (20.32 × 30.48 cm)

Prime Vinyl Standard grip cutting mats 30.5 × 20.3 cm for Silhouette Portrait, 3 pack

Three transparent standard grip cutting mats from Prime Vinyl, 30.5 × 20.3 cm (12 × 8 in) with a grid, made for Silhouette Portrait cutting machines, holding vinyl, craft paper, sticker paper and light card, in reusable PVC with a protective film.

Size and machine fit
30.5 × 20.3 cm (12 × 8 in) for Silhouette Portrait cutting machines, title and first bullet; Silhouette Cameo named in the fourth and fifth bullets
Grip level
Standard grip, title and first and second bullets
Material suitability
Vinyl, craft paper, sticker paper and light card, second bullet
Grid markings
Gridded, title; the product photograph shows an inch grid
Pack contents
3 transparent mats, title and first bullet
Film
Protective film to put back after use, fifth bullet
Care advice
Replace the film after use; remove residue carefully with a spatula, fifth bullet
Amazon reference
B0DG8V8P5J (same reference on 5 Amazon marketplaces)
EAN
0769047696996
  • The Silhouette Portrait size: 12 × 8 in
  • Materials for standard grip named
  • Portrait in the title, Cameo in the bullets

Best for: A Silhouette Portrait cutting machine owner replacing worn standard mats.

≈ 10 €
Check price on Amazon

Specifications

Size and machine fit
30.5 × 20.3 cm (12 × 8 in) for Silhouette Portrait cutting machines, title and first bullet; Silhouette Cameo named in the fourth and fifth bullets
Grip level
Standard grip, title and first and second bullets
Material suitability
Vinyl, craft paper, sticker paper and light card, second bullet
Grid markings
Gridded, title; the product photograph shows an inch grid
Pack contents
3 transparent mats, title and first bullet
Film
Protective film to put back after use, fifth bullet
Care advice
Replace the film after use; remove residue carefully with a spatula, fifth bullet
Amazon reference
B0DG8V8P5J (same reference on 5 Amazon marketplaces)
EAN
0769047696996

The Prime Vinyl mat listing, bullet by bullet

Five bullets: three transparent standard grip mats of 12 × 8 in for Silhouette Portrait cutting machines; enough grip for vinyl, craft paper, sticker paper and light card, with easy release; clean, precise cuts; odourless, reusable PVC, described as for the Silhouette Cameo; and care advice to replace the film and clean with a spatula.

Prime Vinyl: Portrait or Cameo

12 × 8 in is the Portrait size. The fourth and fifth bullets call the mat one for the Silhouette Cameo cutting machine, which takes a larger mat. The size in the title and first bullet is the one to go by.

Prime Vinyl and the CAMEO 5 Alpha

The Silhouette CAMEO 5 Alpha cutting machine reviewed on this site is not named, and a 12 × 8 in mat is the smaller format.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 10 € to 13 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More plotter cutting mats

  • Eight Lya Vinyl mats fanned out — purple Strong, pink Fabric, five green Standard, blue Light — with a yellow scraper

    Lya Vinyl Cutting mats 12 × 12 in, 5 standard, 1 light, 1 strong, 1 fabric grip, with scraper

    Eight 12 × 12 in PVC cutting mats from Lya Vinyl for Cricut Explore Air and Maker cutting machines — five green standard grip, one blue light grip, one purple strong grip and one pink fabric grip — with a vinyl scraper and a protective film on each.

    Size and machine fit
    30.5 × 30.5 cm (12 × 12 in), for Cricut Explore Air series and Maker cutting machines, title and first bullet
    Grip level
    5 standard (green), 1 light (blue), 1 strong (purple), 1 fabric (pink), first and second bullets
    Material suitability
    Fabric grip for any fabric; standard for medium materials; light for light materials; strong for heavy materials, second bullet
    Grid markings
    Absent from the listing text — the product photograph shows inch grids
    Pack contents
    8 mats and 1 vinyl scraper, first bullet; the product photograph matches the colours and count
    Film
    Protective film on each mat, third and fourth bullets
    Care advice
    Keep the clear film on in storage; one set is stated to last a professional vinyl crafter 6 months, fourth bullet
    Amazon reference
    B0BCNYDB3R (same reference on 5 Amazon marketplaces)
    EAN
    0713424693726
    • Five standard grip mats, the grip the listing says gets used most
    • Four grips colour-coded
    • Only one each of light, strong and fabric grip

    Best for: A regular vinyl crafter on a Cricut Explore Air or Maker cutting machine who wears out standard mats fastest.

    ≈ 16 €
    Check price on Amazon
  • Three blue RANCOVY LightGrip mats with grids marked to 12 in and 30 cm

    RANCOVY LightGrip cutting mats for Cricut Maker and Explore, 3 pack

    Three LightGrip self-adhesive cutting mats from RANCOVY with grid lines, for Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, holding office paper, printable fabric, light card, thin scrapbook paper, gift wrap and vinyl, in PVC with a protective film.

    Size and machine fit
    Size absent from the listing text — the grid in the product photograph runs to 12 in on both edges; Cricut Maker 4, Maker 3, Maker, Explore 5, 4, 3, Air 2, Air and One cutting machines, first bullet
    Grip level
    LightGrip, title and second bullet
    Material suitability
    Office paper, printable fabric, light card, thin scrapbook paper, gift wrap, Vinyl 651 and heat transfer vinyl, second bullet
    Grid markings
    Exact grid lines, first bullet
    Pack contents
    3 mats, title and first bullet
    Film
    Transparent protective film, fifth bullet
    Care advice
    Scrape off excess with a scraper, lift cuts with a spatula, keep the film on after use, fifth bullet
    Amazon reference
    B09TVP4X1X (same reference on 6 Amazon marketplaces)
    EAN
    0762102992095
    • Light grip for thin paper and printable fabric
    • Cricut cutting plotter models named one by one
    • Mat size readable only from the photographed grid

    Best for: A Cricut Maker or Explore cutting machine owner cutting thin paper who has confirmed the mat size elsewhere.

    ≈ £11 / 13 €
    Check price on Amazon
  • Three long gridded mats in green, blue and purple, the purple one printed with a grip colour key

    QWORK Cutting mats 30.5 × 61 cm, light, standard and strong grip, for Cricut Maker and Explore Air 2, 3 pack

    Three 30.5 × 61 cm cutting mats from QWORK in light, standard and strong grip, for Cricut Maker, Explore Air 2, Air and One cutting machines, with light grip for paper, standard for card and vinyl, and strong for thick card and bonded fabric.

    Size and machine fit
    30.5 × 61 cm, for Cricut Maker, Explore Air 2, Air and One cutting machines, title and first and second bullets
    Grip level
    Light grip, standard grip and strong grip, first bullet
    Material suitability
    Light grip: paper, board and light materials; standard: card, vinyl and medium materials; strong: thick card and reinforced fabric, third to fifth bullets
    Grid markings
    Absent from the listing text — the product photograph shows grids and a colour key: blue light, green standard, pink fabric, purple strong
    Pack contents
    3 mats, title and first bullet
    Film
    Absent from the listing
    Care advice
    Absent from the listing
    Amazon reference
    B0F6XG7S7K (same reference on 6 Amazon marketplaces)
    EAN
    0795973945013
    • The long 30.5 × 61 cm format
    • Each grip matched to materials
    • No grid, film or care advice

    Best for: A Cricut Maker or Explore Air 2 cutting machine owner cutting long banners or borders.

    ≈ 16 €
    Check price on Amazon

Elsewhere on the workbench

  • Twenty-two SIQUK brass MK8 nozzles engraved 0.2 to 1.0, beside a small clear box

    SIQUK MK8 brass nozzles, 22 pieces, 0.2 to 1.0 mm

    Twenty-two MK8 brass nozzles from SIQUK with M6 threads for 1.75 mm filament, in seven orifice sizes from 0.2 to 1.0 mm, ten of them 0.4 mm, with a storage box.

    Hotend standard
    MK8, M6 thread, 1.75 mm filament input; MakerBot, CR-10, RepRap and Prusa i3 named, first three bullets
    Orifice diameter
    0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 mm, first and second bullets; the product photograph shows the size engraved on each nozzle
    Material
    Brass, fourth bullet
    Length
    Absent from the listing
    Abrasion resistance
    Absent from the listing
    Pack contents
    22 nozzles: 2 each of 0.2, 0.3, 0.5, 0.6, 0.8 and 1.0 mm, and 10 of 0.4 mm, first bullet; storage box, title
    Amazon reference
    B07DL24HDY (same reference on 6 Amazon marketplaces)
    EAN
    0651354792785
    • Seven orifice sizes, from 0.2 to 1.0 mm
    • Ten nozzles of 0.4 mm
    • Brass, with no abrasion resistance stated

    Best for: An MK8-type printer owner stocking spare brass nozzles for PLA and ABS.

    ≈ 7 €
    Check price on Amazon
  • Adeept modules laid out — buttons, buzzers, LEDs, joystick, ultrasonic, gas and soil sensors — with an LCD, a GPIO extension board, ribbon cable, breadboard and jumper wires

    Adeept 24-module sensor starter kit for Raspberry Pi 4/3/2 B/B+, 95-page PDF, Python and C

    A starter kit of 24 sensors and modules from Adeept for Raspberry Pi 4, 3 and 2 B/B+ single-board computers, with a PDF manual of about 95 pages in 23 lessons, example code in Python and C, free technical support and a project box; the Raspberry Pi itself is not included.

    Itemised modules
    Absent from the listing text — 24 sensors and modules, title and first bullet; the product photograph shows labelled modules such as a joystick, ultrasonic sensor, MQ-2 gas sensor, soil sensor, LCD, GPIO extension board, breadboard and ribbon cable
    Logic voltage
    Absent from the listing
    Interface
    Absent from the listing
    Labelling
    Absent from the listing
    Documentation and example code
    PDF manual of about 95 pages with 23 lessons, code in Python and C, second bullet; free technical support, third bullet
    Storage
    Project box, fourth bullet
    Amazon reference
    B086HL88XR (same reference on 5 Amazon marketplaces)
    EAN
    0789371035759
    • A manual of about 95 pages in 23 lessons
    • Example code in Python and C
    • Modules not itemised

    Best for: A Raspberry Pi 4 single-board computer owner learning sensors in Python or C lesson by lesson.

    ≈ £37 / 43 €
    Check price on Amazon
  • Arduino Sensor Kit box with a Seeed logo, a base board carrying modules and a display, and six four-pin cables

    Arduino Sensor Kit – Base, over 10 sensors, with tutorials

    Arduino’s official Sensor Kit – Base, TPX00031, for beginners and teachers, with over 10 sensors covering temperature, light, motion, humidity and air quality, and access to tutorials and example projects.

    Itemised modules
    Absent from the listing — over 10 sensors, including temperature, light, motion, humidity and air quality, first and third bullets
    Logic voltage
    Absent from the listing
    Interface
    Absent from the listing text — the product photograph shows modules on a single base board and six four-pin cables
    Labelling
    Absent from the listing
    Documentation and example code
    Tutorials and example projects covering wiring and programming of each sensor, fourth bullet
    Storage
    Absent from the listing text — the product photograph shows a clear plastic case
    Amazon reference
    B08W9X7C3H (same reference on 6 Amazon marketplaces)
    EAN
    7630049202979
    • Official Arduino kit
    • Tutorials and example projects
    • Sensors not itemised

    Best for: A teacher or beginner who wants Arduino’s own tutorials matched to the sensors.

    ≈ $34 / £31 / 36 €
    Check price on Amazon

All plotter cutting mats