Skip to content

For pipe and sheet, not boards

Stannol Soldering grease, 100 g tin, for copper pipe, sheet metal and brass

A 100 g tin of soldering grease from Stannol, made of solder concentrates in mineral grease, for thick solder worked at high heat on copper pipes, sheet metal and brass.

Blue Stannol Lötfett tin marked soldering grease, 50 g, 2 oz net

Stannol Soldering grease, 100 g tin, for copper pipe, sheet metal and brass

A 100 g tin of soldering grease from Stannol, made of solder concentrates in mineral grease, for thick solder worked at high heat on copper pipes, sheet metal and brass.

Form
Grease, title
Chemistry
Solder concentrates in mineral grease, fourth bullet
Residue and cleaning
Absent from the listing
Activity level
Absent from the listing
Volume
100 g, title; the tin in the product photograph is marked 50 g (2 oz net)
Dispensing
Tin, title
Handling guidance
Absent from the listing
Amazon reference
B06XX9V2CP (same reference on 5 Amazon marketplaces)
EAN
4006062740584
  • A tin of soldering grease from an established solder maker
  • Copper pipe, sheet metal and brass named
  • No residue, cleaning or class detail

Best for: A workshop soldering copper pipe, sheet metal or brass with thick solder at high heat.

≈ £14 / 12 €
Check price on Amazon

Specifications

Form
Grease, title
Chemistry
Solder concentrates in mineral grease, fourth bullet
Residue and cleaning
Absent from the listing
Activity level
Absent from the listing
Volume
100 g, title; the tin in the product photograph is marked 50 g (2 oz net)
Dispensing
Tin, title
Handling guidance
Absent from the listing
Amazon reference
B06XX9V2CP (same reference on 5 Amazon marketplaces)
EAN
4006062740584

The Stannol grease listing, bullet by bullet

Five bullets: a grease for thick solder where high heat is used; good joints on copper pipe, sheet metal and brass; support for lasting joints; solder concentrates in mineral grease for general soldering; and a note on Stannol’s wider range of solders, fluxes and stations.

Stannol is a workshop grease

Pipe, sheet and brass. The applications in the second bullet are metalwork, not circuit boards. The rosin and no-clean pastes in this family are the ones sold for electronics.

What Stannol does not say

Nothing on residue, cleaning or corrosiveness. For a grease used on copper, those are the questions to take to Stannol’s data sheet.

Stannol’s tin size

100 g in the title, 50 g on the tin. The tin in the product photograph is marked 50 g, 2 oz net. Which size arrives is worth checking against the order.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 12 € to 17 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More soldering flux

  • NC-559-ASM 10 ml flux syringe marked no halogen, a plunger, a 5 ml syringe, three needles and a solder wick reel marked 2.5 mm × 3.0 m

    VACUBXBY NC-559-ASM no-clean flux paste 10 ml syringe with desoldering braid 2.5 mm

    A set from VACUBXBY with 10 ml of NC-559-ASM no-clean rosin flux paste in a push-in syringe with three needles, lead-free, halogen-free and non-corrosive, and a 2.5 mm oxygen-free copper desoldering braid for SMD, BGA and board rework.

    Form
    Paste in a 10 ml syringe, title and first bullet
    Chemistry
    Rosin, lead-free, halogen-free, title and third bullet
    Residue and cleaning
    No-clean, non-corrosive, third bullet
    Activity level
    Absent from the listing
    Volume
    10 ml (10 cc), title and first bullet
    Dispensing
    Push-in syringe with plunger and three needles, first and fifth bullets
    Handling guidance
    Absent from the listing text — the syringe label in the product photograph begins “Use under well ventilated conditions”; braid of 2.5 mm, 1.5 m in the title, 3 m in the first bullet and 3.0 m on the photographed reel
    Amazon reference
    B0GJZWXNKM (same reference on 6 Amazon marketplaces)
    EAN
    0759039211566
    • A syringe and needles for placing flux precisely
    • No-clean, halogen-free, non-corrosive
    • Braid length: 1.5 m in the title, 3 m in the bullet

    Best for: A board repairer doing SMD rework who wants flux on a needle and braid to lift old solder.

    ≈ 7 €
    Check price on Amazon
  • Two 10 g tins of yellow paste labelled Soldering Flux Paste, Advanced Quality ZJ-18, neutral pH 7 ± 0.3

    YSHODGU No-clean rosin flux paste, 2 × 10 g tins

    Two 10 g metal tins of lead-free rosin flux paste from YSHODGU, sold as no-clean with less residue and little smoke, for repairing phones, motherboards, wiring and boards, and for SMT, LED and BGA work.

    Form
    Paste, title and first bullet
    Chemistry
    Rosin, lead-free, title and first bullet
    Residue and cleaning
    No-clean in the title; less residue, third bullet
    Activity level
    Absent from the listing
    Volume
    2 × 10 g, second bullet
    Dispensing
    Metal tins, second bullet
    Handling guidance
    Absent from the listing — application steps only: wipe the surface, apply paste, melt solder with the iron, fifth bullet
    Amazon reference
    B0FLDBX2HP (same reference on 6 Amazon marketplaces)
    EAN
    0607604921955
    • Two small tins, easy to carry
    • SMT, LED and BGA named
    • No activity level or flux class

    Best for: A phone or board repairer who wants a little rosin paste in a pocket-sized tin.

    ≈ 4 €
    Check price on Amazon
  • Open BOJACK tin of amber paste labelled Soldering Flux Paste, Advanced Quality ZJ-18, Nw 50 g

    BOJACK No-clean lead-free flux paste, 50 g, pH 7 ± 0.3

    A 50 g pack of flux paste from BOJACK, no-clean and lead-free according to the title, with a stated neutral pH of 7 ± 0.3, for soldering electronic components, instruments and metals and for PCB, SMD and SMT repair.

    Form
    Paste, title and first bullet
    Chemistry
    Absent from the listing — lead-free, title
    Residue and cleaning
    No-clean, title
    Activity level
    Absent from the listing — neutral pH 7 ± 0.3; “no corrosion” stated, second and fourth bullets
    Volume
    50 g (1.8 oz), title and second bullet
    Dispensing
    Absent from the listing text — the product photograph shows a screw-top metal tin
    Handling guidance
    Absent from the listing — “non-toxic” is the seller’s wording, fourth bullet
    Amazon reference
    B09P4LJG36 (same reference on 5 Amazon marketplaces)
    EAN
    0762917045382
    • A pH figure: 7 ± 0.3
    • No-clean and lead-free, as the title says
    • Flux chemistry not named

    Best for: A hobbyist soldering boards who wants a no-clean paste in a medium quantity.

    ≈ £7 / 8 €
    Check price on Amazon

Elsewhere on the workbench

  • Ten silver conical soldering tips lined up diagonally

    Saipor 900M-T-B conical tips for 936-type stations, 10 pieces

    Ten 900M-T-B conical soldering tips from Saipor in nickel-plated oxygen-free copper, lead-free, for 900M-standard irons on Hakko, ATTEN, QUICK, Aoyue and 936-type stations, for small SMD work on crowded boards.

    Iron fit
    900M tips for Hakko, Radio Shack 64-053, FEITA, ATTEN, QUICK, Aoyue and 936, 852D+, 858D and 8586 stations, fourth bullet
    Cartridge or bare tip
    Absent from the listing — 900M-type tip, title
    Shape
    900M-T-B, title and fifth bullet
    Size
    Absent from the listing
    Plating
    Nickel-plated oxygen-free copper, first bullet
    Pack contents
    10 tips, title and fifth bullet
    Amazon reference
    B09WHH1WF2 (same reference on 5 Amazon marketplaces)
    EAN
    0761325364481
    • A named tip standard: 900M
    • Ten tips of one type
    • One shape only

    Best for: A 936-type station owner who wears through conical tips and wants spares by the ten.

    ≈ 9 €
    Check price on Amazon
  • ERYONE PETG carbon fibre black filament spool

    ERYONE PETG carbon fibre 1.75 mm, black, 1 kg

    A 1 kg spool of black ERYONE PETG with carbon fibre, printed at 240–260 °C on a 100 °C bed, dried for 24 hours before vacuum packing and advised to be kept in resealable foil once opened.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Nozzle 240–260 °C, bed 100 °C, third bullet; the spool label in the product photograph reads 230–250 °C nozzle and 75–85 °C bed
    Drying advice
    Dried 24 hours before vacuum packing; store in resealable foil bags after opening, fifth bullet
    Net weight
    1 kg, title and second bullet
    Finish
    Absent from the listing
    Amazon reference
    B0D6G98F3K (same reference on 6 Amazon marketplaces)
    EAN
    0810168132280
    • Nozzle and bed temperatures published
    • Drying before packing and storage advice after opening
    • Two tolerances: ±0.03 mm in the title, ±0.02 mm in the bullet

    Best for: Stiff functional parts in PETG on a printer already fitted with a suitable nozzle.

    ≈ $25 / £21 / 23 €
    Check price on Amazon
  • eSUN ePLA-CF carbon fibre filled black filament spool

    eSUN PLA-CF carbon fibre filled 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN ePLA-CF: PLA with chopped carbon fibre for higher strength and flexural modulus and a matte finish, named as compatible with fast printers including the AnkerMake M5, with no nozzle guidance.

    Base polymer
    PLA, first bullet
    Filler
    Chopped carbon fibre, organically infiltrated, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing — lower water absorption than eSUN ePA-CF is stated, fourth bullet
    Net weight
    1 kg, title
    Finish
    Matte carbon fibre texture with less visible layering, second bullet
    Amazon reference
    B0CH36F58Y (same reference on 6 Amazon marketplaces)
    EAN
    0840249104332
    • Carbon fibre filler for higher strength and flexural modulus, as stated
    • A matte finish that makes layer lines less visible
    • No mention of whether a hardened nozzle is needed

    Best for: Stiff jigs, brackets and drone parts on a fast printer, once the nozzle is confirmed suitable.

    ≈ £20 / 17 €
    Check price on Amazon

All soldering flux